KO

IS12L-9S-RSi-INT-D0

P/N 203203

Integrating sphere detector for laser power measurement up to 9 W.

    • 12 mm Ø
    • 50 mm Ø
    • 대류
    • 수냉식
    • 실리콘
    • INTEGRA(USB)
    • INTEGRA(RS-232)
    • INTEGRA(USB + 외부 트리거)
    • BLU (무선)
IS12L-9S-RSi-INT-D0 IS12L-9S-RSi-INT-D0 IS12L-9S-RSi-INT-D0 IS12L-9S-RSi-INT-D0 IS12L-9S-RSi-INT-D0 IS12L-9S-RSi-INT-D0 IS12L-9S-RSi-INT-D0 IS12L-9S-RSi-INT-D0 IS12L-9S-RSi-INT-D0 IS12L-9S-RSi-INT-D0 IS12L-9S-RSi-INT-D0 IS12L-9S-RSi-INT-D0 IS12L-9S-RSi-INT-D0 IS12L-9S-RSi-INT-D0 IS12L-9S-RSi-INT-D0 IS12L-9S-RSi-INT-D0 IS12L-9S-RSi-INT-D0 IS12L-9S-RSi-INT-D0

Traceable calibration:

Logo nist

함께 사용 가능

Logo Integra

제품군 주요 특징

Fastest response

With their silicon sensors, the IS detectors are as fast as photodiodes.

High average power

Two sizes are available, both with high average power capabilities:

  • 12 mm aperture for up to 9 W of continuous power
  • 50 mm aperture for up to 1000 W of continuous power

Resistant coating

Our proprietary coating is designed to be strong. Its damage thresholds are orders of magnitude higher than any other "white" coatings on the market.

Precise calibration

The IS detectors have a NIST-traceable calibration for their entire calibrated spectral range. Temperature compensation completes the calibration to give you the most accurate and stable measurements.

Choice of output

The IS detectors are available with two output options:

  • INTEGRA with USB output (-INT)
  • INTEGRA with RS-232 output (-IDR)

Award-winning technology

The laser power detectors in the IS series were recognized among the best solutions on the market by an esteemed and experienced panel of judges from the optics and photonics community at the 2022 Laser Focus World Innovators Awards. 


호환 스탠드

호환 디스플레이 장치 및 PC 인터페이스

  • INTEGRA INTEGRA

    파워&에너지 계측용 내장 PC 인터페이스 검출기 출력 옵션으로만 구매 가능.

Included

  • Calibration Calibration

    Calibration certificate

  • PWC PWC

    Personal wavelength correctionTM Certificate

  • COVER

    Protective cover for optical surfaces

계측 성능

  • 최대 평균 파워(연속)

    9 W

  • 등가노이즈파워(NEP)1

    1 μW

  • 스펙트럼 범위

    340 - 1100 nm

  • 일반 상승 시간

    0.2 s

  • 파워와의 선형성

    ±1 %

  • 구형 내경

    50 mm Ø

  • 최대 입사각

    ± 10°

  • 최대 발산

    10° (half-angle)

  • 파워 교정 불확정성

    ±5.0 % (405 - 499 nm)
    ±3.5 % (500 - 1063 nm)
    ±2.5 % (1064 nm)
    • 1. 1070nm. 액면 값. 실제 값은 환경의 전자파 간섭 및 파장에 따라 달라집니다.

손상 한계

  • 최대 평균 파워 밀도1

    2 kW/cm²

  • 최대 에너지 밀도2

    400 mJ/cm²
    • 1. 1064 - 1070nm, CW. May vary with wavelength and average power.
    • 2. 1064 - 1070nm, 7ns. May vary with wavelength and pulse width.

물리적 특성

  • 냉각

    대류

  • 구경 지름

    12 mm

  • 치수

    66H x 78W x 66D mm

  • 중량

    0.7 kg
프린트 사양

CA$1,954.00*

문의 Explore customization possibilities

AWARD-WINNING TECHNOLOGY

The laser power detectors in the IS series were recognized among the best solutions on the market by an esteemed and experienced panel of judges from the optics and photonics community at the 2022 Laser Focus World Innovators Awards. 

The IS series opens up new measurement possibilities such as following the complete ramp-up of high-power laser sources, or tracking fast changes in kW-level laser power. The integrating sphere’s proprietary coating was designed to handle high laser power density, and its NIST-traceable calibration provides accurate, reliable results.

Measure from low powers to the multi-kilowatt level with a single device

The broad dynamic range and very low noise equivalent power (NEP) of the IS integrating spheres provide users the ability to measure several lasers with different average powers with only one device.

Benefits:

  • Outstanding signal-to-noise ratios (SNR)
  • No need to change detector or manage attenuation when the measured power spans a wide range
  • Lower initial and maintenance costs compared to buying multiple detectors to cover the same range

Monitor high-power lasers at high speed

Thanks to their photodiode-based sensor, power meters of the IS series measure in under 200 ms, tens of times faster than with thermal detectors.

Benefits:

  • Faster measurements: no need to wait for the detector to stabilize
  • Discern quick changes in laser power
  • Follow the ramp-up of high-power sources
  • Increased productivity

Diffused back-reflections confined in an angular cone

While thermal detectors and water calorimeters diffusely reflect 10% to 15% of the incoming light in a Lambertian manner, integrating spheres of the IS series reflect only 6% to 12% more directionally through their optical aperture. This helps improve safety in the measurement environment by making it easier to deal with back reflections.

NIST-TRACEABLE CALIBRATION INCLUDED

Traceable calibration provides the ability to trace the readings of laser output measurements to known international measurement standards determined by the National Institute of Standards and Technology (NIST). This ensures that the measurements taken by the instruments are reliable and accurate.

Benefits include:

  • Make valid comparisons of measurements taken by other instruments inside and outside your organization and over time
  • Comply with regulations or conform to industry standards
  • Avoid costly measurement mistakes in your operations
  • Improve customer confidence in your laser systems
  • Ensure laboratory experiment validity
  • Demonstrate measurement accuracy easily with the calibration certificate we provide
 

관련 영상

All videos

필요한 호환 제품

*Does not include shipping fees, import fees or local representation. Request quote for full details and local sales contact.

Your item has been added to your cart!

You might need these specific products to be able to use the placeholder only.

Compatible products

No compatible product

귀하가 사용하는 레이저에 본 제품이 맞으면 체크하십시오.

계측 유형:

1

빔 사이즈

2

레이저 유형

3

빔 프로파일

COPYRIGHT ©2024 Gentec-eo Spektrum média