- 12 mm Ø
- 50 mm Ø
- INTEGRA (USB)
- INTEGRA (RS-232)
- INTEGRA (USB with external trigger)
- BLU (wireless)
With its silicon sensor, the integrating sphere is as fast as a photodiode.
High average power
Measure up to 1000 W of continuous power.
Our proprietary coating is designed to be strong. Its damage thresholds are orders of magnitude higher than any other "white" coatings on the market.
The IS detectors have a NIST-traceable calibration for there entire calibrated spectral range. Temperature compensation completes the calibration to give you the most accurate and stable measurements.
Choice of output
The IS detectors are available with two output options:
- INTEGRA with USB output (-INT)
- INTEGRA with RS-232 output (-IDR)
Compatible displays & PC interfaces
Embedded PC interface for power & energy measurement. Can only be purchased as a detector output option.
Maximum average power (continuous)1000 W
Noise equivalent power110 μW
Spectral range340 - 1100 nm
Typical rise time0.2 sec
Power calibration uncertainty±5.0 % (405 - 499 nm)
±3.5 % (500 - 1069 nm)
±2.5 % (1070 nm)
Linearity with power±1 %
Sphere inner diameter100 mm Ø
Maximum incidence angle± 25° for beam diameter < 12mm, ± 5° for beam diameter > 12mm
Maximum divergence10° (half-angle)
- 1. At 1070 nm. Nominal value. Actual value depends on environmental electromagnetic interference and wavelength.
Maximum average power density15 kW/cm²
Maximum energy density2400 mJ/cm²
- 1. At 1064 - 1070 nm, CW. May vary with wavelength and average power.
- 2. At 1064 - 1070 nm, 7 ns. May vary with wavelength and pulse width.
Aperture diameter50 mm
Dimensions127H x 140W x 115D mm
Embedded monitor for power and energy detectors
Universal PC application software.
Calibration Uncertainty of Photodetectors
How calibration works
Same laser, different measurements. What's the problem?
Understanding the spectral characteristics of your detectors
Integrating sphere laser power detectors
Software for BLU, HP, INTEGRA, MAESTRO, U-LINK and P-LINK series. Don't forget to download and install the USB Drivers.
INTEGRA (V2 RS232 - Photodiode)
Firmware for Integra V2 RS232 photodiode series only.
INTEGRA (V2 USB - Photodiode)
Firmware for Integra V2 USB photodiode series only.
LabVIEW VI examples
LabVIEW VI examples for 9.0+
USB drivers installer
Use this file to install USB drivers for these products: MAESTRO, INTEGRA, U-LINK, P-LINK, M-LINK, S-LINK, BLU, PRONTO, HP, MACH6, BEAMAGE
Compatible products you may need
Your item has been added to your cart!
You might need these specific products to be able to use the placeholder only.
No compatible product