- 6 mm Ø
- 12.5 mm Ø
- High sensitivity
- INTEGRA (USB)
- INTEGRA (RS-232)
- INTEGRA (USB with external trigger)
- BLU (wireless)
Up to 200 kHz Pulse-to-Pulse
Measure every pulse, with no sampling, at high rep rates, up to 200 kHz
Capture and Store up to 4 million Pulses
Store 40 seconds of data at 100 kHz
Track Missing Pulses and Pulses Below Threshold
Know how many pulses were missed or that didn’t make the energy threshold with this unique pulse feature
Several Heads to Choose From
Silicon, InGaAs and pyroelectric heads for a broad wavelength and energy range
Analog Module Available
Use our fast M6 detectors with the APM and an oscilloscope for fast analog energy measurements
Full-Speed USB 2.0 Connection
Ensures high data rate transfer and fast operation
User-Friendly Software with Many Diagnostic Features
- Live mode, strip chart, histogram and statistics displays
- FFT display of pulse energy data for temporal diagnostics
- Life test mode to automate laser testing
Compatible displays & PC interfaces
200 kHz module for M6 heads.
Spectral range0.35 - 2.5 μm
Typical rise time150 ns
Maximum repetition frequency200000 Hz
Maximum measurable energy1200 mJ
Noise equivalent energy2 μJ
Maximum pulse width100 ns
Energy calibration uncertainty±4 %
- 1. Maximum pulse energy reading will vary with wavelength and probe voltage responsivity. For more details, please read Application Note 121D-201932 and contact us at firstname.lastname@example.org
Maximum power25 W
Aperture diameter12.5 mm
Dimensions76H x 111W x 76D
200 KHz energy meter and probes
Energy measurement limits using joulemeter probes
How calibration works
Understanding the spectral characteristics of your detectors
Measuring pulse energy of high-rep-rate lasers in real time
Measure 200 kHz pulse-to-pulse energy with MACH 6
This is a set of LabVIEW VI’s that allow for the use of all the basic MACH 6 functions. Note that a LabView licence is required to run this software.
Software for BLU, HP, INTEGRA, MAESTRO and P-LINK series. Don't forget to download and install the USB Drivers.
Software for Mach 6 series.
USB drivers for MACH 6 series.
SIMPLE MACH 6
LabView VI’s for basic MACH 6 operation. A LabView license is required to run these examples.
Your item has been added to your cart!
You might need these specific products to be able to use the placeholder only.
No compatible product