M6-6 series
3D model (STEP)
- 9814
- English
MACH 6 + M6-6-PY
P/N 204007Integrating sphere detector for laser energy measurement up to 20 mJ.
-
- 6 mm Ø
- 12.5 mm Ø
-
- Standard
- High sensitivity
-
- Silicon
- InGaAs
- Pyroelectric
-
- INTEGRA (USB)
- INTEGRA (RS-232)
- INTEGRA (USB with external trigger)
- BLU
Key features
Up to 200 kHz Pulse-to-Pulse
Measure every pulse, with no sampling, at high rep rates, up to 200 kHz
Capture and Store up to 4 million Pulses
Store 40 seconds of data at 100 kHz
Track Missing Pulses and Pulses Below Threshold
Know how many pulses were missed or that didn’t make the energy threshold with this unique pulse feature
Several Heads to Choose From
Silicon, InGaAs and pyroelectric heads for a broad wavelength and energy range
Analog Module Available
Use our fast M6 detectors with the APM and an oscilloscope for fast analog energy measurements
Full-Speed USB 2.0 Connection
Ensures high data rate transfer and fast operation
User-Friendly Software with Many Diagnostic Features
- Live mode, strip chart, histogram and statistics displays
- FFT display of pulse energy data for temporal diagnostics
- Life test mode to automate laser testing
Compatible stand
Compatible displays & PC interfaces
-
Mach 6
200 kHz module for M6 heads.
Measurement capabilities
-
Spectral range
0.35 - 2.5 μm -
Typical rise time
150 ns -
Repeatability
±1 % -
Maximum repetition frequency
200000 Hz -
Maximum measurable energy1
20 mJ -
Noise equivalent energy
0.2 μJ -
Maximum pulse width
100 ns -
Energy calibration uncertainty
±4 % -
- 1. Maximum pulse energy reading will vary with wavelength and probe voltage responsivity. For more details, please read Application Note 121D-201932 and contact us at info@gentec-eo.com
Damage threshold
-
Maximum power
5 W
Physical characteristics
-
Aperture diameter
6 mm -
Absorber
Pyroelectric -
Dimensions
38.1 Ø x 58.4D mm -
Weight
0.15 kg
-
STAND-D-233
Stand with 2 x 3in base, 3in cylinder, delrin post, ¼-20 & 8-32. PRICING WHEN PURCHASED ALONE IS DOUBLE THE LISTED VALUE...
-
MACH 6
User Manual
200 KHz energy meter and probes
- 2.3
- English
Energy measurement limits using joulemeter probes
Technical note
- English
How calibration works
Technical note
- English
Understanding the spectral characteristics of your detectors
Technical note
- English
Measuring pulse energy of high-rep-rate lasers in real time
Technical note
- English
Measure 200 kHz pulse-to-pulse energy with MACH 6
Technical note
- English
-
MACH 6
LabView Drivers
This is a set of LabVIEW VI’s that allow for the use of all the basic MACH 6 functions. Note that a LabView licence is required to run this software.
- English
PC-Gentec-EO
Software
Software for BLU, HP, INTEGRA, MAESTRO and P-LINK series. Don't forget to download and install the USB Drivers.
- 2.01.04
- English
PC-MACH-6
Software
Software for Mach 6 series.
- 2.00.04
- English
MACH 6
USB Drivers
USB drivers for MACH 6 series.
- 1.00.00
- English
Related videos
Compatible products you may need
STAND-D-233
Stand with 2 x 3in base, 3in cylinder, delrin post, ¼-20 & 8-32. PRICING WHEN PURCHASED ALONE IS DOUBLE THE LISTED VALUE...
Mach 6
Display: PC only
Number of channels: 1
Output type: USB & Analog
Measurement type: Pulse Energy
Your item has been added to your cart!
You might need these specific products to be able to use the placeholder only.
Compatible products
No compatible product
