A screen designed for professional use
10” high-resolution, anti-glare touchscreen, just like one would expect nowadays for a professional work tool.
A user interface that won’t leave you searching around
With its modern and intuitive user interface, MIRO ALTITUDE is so simple to use that it is literally plug-and-play. It was designed to take full advantage of its larger-than-life screen so you can see at a glance all that matters to your measurement at all times.
Super strong and durable
Remarkably strong and durable metal casing that you won’t be afraid to break in the field or during transportation.
Tons of connectivity possibilities
More connectivity possibilities than ever before with: Ethernet, RS232, sync out, analog out (coming soon), USB-C and 2 USB. No doubt you’ll be able to do the setup you need for optimal productivity.
Convenient ways to use it
- On a stand
Display modes for all use cases
MIRO ALTITUDE has 3 display modes, including one that lets you time-travel to check past data points without interrupting the current measurement session, and another mode with extra large size digits that you can view from across the room.
Featuring XNR AnticipationTM
Measure up to 10x faster (detector-dependant) with XNR AnticipationTM, which is probably the fastest measuring capability ever brought to a measurement instrument in this industry.
Built-in data viewer
View a recorded measurement session directly on your MIRO ALTITUDE.
Built-in file manager
Save and organize your recorded measurement sessions and screenshots or move your files to your USB stick.
Reads all heads
MIRO ALTITUDE is compatible with all Gentec-EO power and energy detectors that have the standard DB15 output.
Controller and GUI specifications
Digital display size217 x 136 mm LCD - 1280 x 800 pixels
Data displayReal time, scope, statistics, digital tuning needle and averaging
Analog output0-5 V, full scale
External trigger3.3 to 24 V
Serial commands viaUSB-C or RS-232
Data storage viaInternal memory or USB key
Battery typeRechargeable Li-ion cell
Battery life6 hours
External power supply9-24 VDC 3.33 A, USB-C (min 18 W)
Power meter specifications
Power range4 pW - 100 kW
Device accuracy0.5 % ±3 µV for 20 % to full scale
StatisticsCurrent value, max, min, average, standard deviation, RMS & PTP stability, time
Energy meter specifications
Energy range2 fJ to 30 kJ
Device accuracy1 % ±50 µV (<500 Hz)2% ±50 µV (500 Hz - 10 kHz)
Software trigger level0.1 to 99.9 %, 0.1 % resolution, default 2 %
Repetition rate110 kHz
StatisticsCurrent value, max, min, average, standard deviation, RMS & PTP stability, pulse #, repetition rate and average power
- 1. Maximum repetition rate may vary with PC and detector speeds.
Dimensions268W x 196H x 36D mm
There is no document to download for this product. Contact us for technical details.
All-new MIRO ALTITUDE: Supercharged professional display device for power and energy measurement
MIRO ALTITUDE is Gentec-EO’s new flagship meter for reading your laser power and energy measurements.
More than an evolution from our current product line, we see it as a revolution in the laser beam measurement industry that helps engineers and service technicians increase their productivity thanks to numerous new features in both hardware and software.
Supercharge your productivity with an intuitive user interface, an extra large screen, tons of connectivity possibilities, 3 convenient display modes, a built-in dataviewer and a built-in file manager.
Enter modern times of laser beam measurement with MIRO ALTITUDE.
MIRO ALTITUDE user interface tour
1 - NAVIGATION BAR
The upper part of the screen includes a direct access to the control center, data acquisition buttons and various indicators (battery level and time).
2 - MEASUREMENT SETTINGS PANEL
Use the various measurement settings available for your detector to set everything related to your measurement.
Wavelength: Enter your wavelength or choose from a list of recently used wavelengths
Range: Set the measuring range to autoscale or to one of the standard values
Measurement mode: Choose what you want to measure: power, SSE, moving average, irradiance, fluence, etc.
Moving average: Choose the desired moving average to use to plot the chart
Trigger: Enter the desired trigger level or choose from a list of recently used values
XNR AnticipationTM: Toggle on to measure up to 10x-20x faster without losing any significant accuracy in your readings
Correction: Set a multiplier and an offset value for your measurement
Attenuator: Toggle when using a Gentec-EO calibrated attenuator with your detector
3 - DISPLAY AREA
The top part of the display area is the same for all three display modes.
Clear: Use this button to reset the statistics and erase the scope graph’s data
Zero: Set the current measured value to zero
Display mode: Toggle your display mode between: scope, needle and bar chart
With this display mode, you can travel in time using the time line at the bottom to view measurements at any point in time while MIRO ALTITUDE continues to measure.
The dotted blue line shows the average value.
Faster than an analog needle thanks to XNR AnticipationTM! This mode is particularly useful when tuning a laser. The real-time value and statistics are always visible at the top of the screen.
Arrows indicate the minimum and maximum measured values since the last reset. The zoom function sets these values as full scale of the digital gauge.
This is the simplest display mode. Its main advantage is that the current measured value is displayed in huge size, allowing you to read the measurement from a good distance.
Arrows indicate the minimum and maximum measured values.
BUILT-IN FILE MANAGER AND DATA VIEWER
MIRO’s built-in file manager lets you access and organize all your screenshots and recorded measurement sessions. You can also copy files on your USB key.
There is also a built-in image viewer so you can view your screenshots directly on your MIRO ALTITUDE.
Visualize a recorded measurement session with our built-in data viewer. Data will be displayed in the scope chart display.
The control center is accessible from all screens in the top left corner.
Connect/disconnect your Gentec-EO detector to MIRO ALTITUDE
Easily navigate between the main screens of the app:
Settings for the device.
System: Set device settings: language, date, time, sleep, number of digits, etc.
Recording: Set your default recording parameters for power/energy measurement and destination.
Ethernet: Set your Ethernet parameters or let MIRO manage this automatically.
RS-232: Set your RS-232 parameters.
Analog output (coming soon): Set your analog output parameters.
Trigger: Use an external trigger and set your trigger level.
About: View important information about your device (serial number, firmware version software version, calibration date) and find support.
Your item has been added to your cart!
You might need these specific products to be able to use the placeholder only.
No compatible product