UP52N-50S-QED-IDR-D0

Maximum average power (continuous)

Maximum average power (1 minute)

Noise equivalent power¹

Spectral range²

Typical rise time³

Typical power sensitivity⁴

Power calibration uncertainty⁵

Repeatability

• 1. Nominal value, actual value depends on electrical noise in the measurement system.
• 2. For the calibrated spectral range, see the user manual.
• 3. With anticipation.
• 4. Into 100 kΩ load. Maximum output voltage = sensitivity x maximum power.
• 5. Including linearity with power.

Maximum measurable energy¹

Noise equivalent energy²

Minimum repetition period

Maximum pulse width

Energy calibration uncertainty³

• 1. For 360 μs pulses. Higher pulse energy possible for long pulses (ms), less for short pulses (ns).
• 2. Nominal value, actual value depends on electrical noise in the measurement system.
• 3. When single-shot energy calibration is purchased

Maximum average power density¹

Maximum energy density²

• 1. At 1064 nm, 10 W CW. May vary with wavelength and average power.
• 2. At 1064 nm, 7 ns, 10 Hz. May vary with wavelength and pulse width.

Cooling

Aperture diameter

Absorber

Dimensions

Weight