QE-B series, UM-B series, PH series, PE-B series
2D CAD file (PDF)
- 9254C
- 英文
PH100-Si-HA-D0
P/N 202681Photodiode detector for laser power measurement up to 36 mW.
-
- 5 mm Ø
- 7 mm Ø
- 10 mm Ø
-
- 硅
- 紫外线 - 硅
- 锗
-
- 无
- OD1
- OD2
- OD0.3
-
- Standard
- INTEGRA (USB)
- INTEGRA (RS-232)
- INTEGRA（带有外部触发器的 USB）
- BLU（无线）
可追溯校准
适用于
Product family key features
Large apertures
10 mm Ø for the silicon sensors
3 versions
- Silicon 350 - 1080 nm, up to 750 mW
- Silicon-UV 210 - 1080 nm, up to 38 mW
- Germanium 800 - 1650 nm, up to 500 mW
Choice of attenuators
Models with attenuators include a calibration both with and without the removable filter
High accuracy
The new PH100-SI-HA presents the lowest calibration uncertainty to date.
Precise calibration
Wavelength selection in 1 nm steps
Smart interface
Containing all the calibration data
Compatible stand
Compatible displays & PC interfaces
-
MIRO ALTITUDE
Touchscreen display device for power & energy measurement. Single-channel.
-
MAESTRO
Touchscreen display device for power & energy measurement. Single-channel, multiple outputs (USB, Ethernet, analog).
-
U-LINK (USB)
PC interface for power & energy measurement. Single-channel, USB output.
-
U-LINK (RS-232)
PC interface for power & energy measurement. Single-channel, RS-232 output.
-
INTEGRA
Embedded PC interface for power & energy measurement. Can only be purchased as a detector output option.
-
TUNER
Display device with tuning needle for power measurement. Single-channel.
-
UNO
Economical display device for power measurement. Single-channel.
-
P-LINK (USB)
PC interface for power measurement. Single-channel, USB output.
-
P-LINK (RS-232)
PC interface for power measurement. Single-channel, RS-232 output.
-
M-LINK
PC interface for power & energy measurement. Single-channel, USB output.
-
P-LINK-4 (USB)
PC interface for power measurement. Four channels.
包括
-
Calibration
Calibration certificate
-
PWC
Personal wavelength correctionTM Certificate
-
COVER
Protective cover for optical surfaces
Measurement capabilities
-
Maximum average power1
36 mW -
Noise equivalent power2
10 pW -
Spectral range
350 - 1080 nm -
Typical rise time
0.2 s -
Power calibration uncertainty
±5.0 % (350 - 399 nm)
±2.0 % (400 - 449 nm)
±1.5 % (450 - 809 nm)
±2.0 % (810 - 899 nm)
±4.0 % (900 - 1009 nm)
±7.5 % (1010 - 1080 nm) -
Peak sensitivity
0.5 A/W @ 980 nm -
Minimum repetition rate3
1000 Hz -
- 1. At 1064 nm. See curves for maximum power at other wavelengths.
- 2. At 980 nm. Nominal value. Actual value depends on environmental electromagnetic interference and wavelength.
- 3. See user manual for details.
Damage thresholds
-
Maximum average power density
100 W/cm²
Physical characteristics
-
Aperture diameter
10 mm -
Absorber
Si -
Dimensions
38.1Ø x 27.4D mm -
Weight
0.13 kg -
Distance to sensor face
13.7 mm
-
PH100-Si-HA-D0, PH100-SiUV-D0, PE10B-Si-D0
3D model (STEP)
- 9664A
- 英文
Power detectors
Absorption curves
Absorption curves for power detectors
- 2025
- 英文
INTEGRA module
3D model (STEP)
- 9875
- 英文
INTEGRA module for PH, PE and IS series
2D CAD file (PDF)
- 9588A
- 英文
-
STAND-D-233
Stand with 2 x 3in base, 3in cylinder, delrin post, ¼-20 & 8-32.
FOA-FULL-FC
Fiber optic adaptor FC/PC with SM1 external thread. For: XLP12, UP10, IS12, UP25, PH, PE, UM, QE8, THZ9D, BEAMAGE-4M. Al...
FOA-FULL-SMA
Fiber optic adaptor SMA with SM1 external thread. For: XLP12, UP10, IS12, UP25, PH, PE, UM, QE8, THZ9D, BEAMAGE-4M. Also...
FOA-FULL-ST
Fiber optic adaptor ST with SM1 external thread. For: XLP12, UP10, IS12, UP25, PH, PE, UM, QE8, THZ9D, BEAMAGE-4M. Also ...
XLP12-TUBE
Isolation tube for XLP12 series. Can be used with any detector having a SM1-threaded aperture. Includes XLP12 series, UP...
ND0.5
ND 0.5 filter in SM1-threaded stackable holder.
ND1.0
ND 1.0 filter in SM1-threaded stackable holder.
ND2.0
ND 2.0 filter in SM1-threaded stackable holder.
EXT-#
Extension cable. Various cable lengths are available, up to 40 m.
FOA-FULL-FCA
Fiber optic adaptor FC/APC with SM1 external thread. For: XLP12, UP10, IS12, UP25, PH, PE, UM, QE8, THZ9D, BEAMAGE-4M. A...
NAN-915
Hardshell, waterproof carrying case with padded dividers. Internal size 13 L (351 mm x 236 mm x 157 mm).
-
Calibration Uncertainty of Photodetectors
Technical note
- 202174
- 英文
How calibration works
Technical note
- 2025
- 英文
Recalibration options when using an extension cable
Technical note
- 202176
- 英文
Understanding the spectral characteristics of your detectors
Technical note
- 202202
- 英文
Power detectors - overview
Comparison table
- 2025
- 英文
Understanding your calibration certificate
Technical note
- 202184B
- 英文
Calibration: For measurements you can count on
Technical note
- 英文
Same laser, same detector: A measure of repeatability
Technical note
- 2026
- 英文
-
PC-Gentec-EO
Software
Software for BLU, HP, INTEGRA, MAESTRO, U-LINK and P-LINK series. Don't forget to download and install the USB Drivers.
- 2.01.26
- 英文
Integra
LabVIEW VI examples
LabVIEW VI examples for 9.0+
- 1.00.04
- 英文
USB drivers installer
USB drivers
Use this file to install USB drivers for these products: MAESTRO, INTEGRA, U-LINK, P-LINK, M-LINK, S-LINK, BLU, PRONTO, HP
- 2.00.04
- 英文
Integra
Python examples
Python examples for INTEGRA.
- 1.00.00
- 英文
Serial command examples in C for HP and INTEGRA
Code example
- 1.00.00
- 英文
皮瓦级测量能力
基于光电二极管的检测器可快速响应可见近红外波长。我们的硅吸收器可以测量低至皮瓦级的非常低的功率。
可为客户提供以下优势：
- 较宽的动态范围
- 噪音微乎其微
- 快速响应
- 对周围环境不敏感
深入了解您的激光行为
不再为电子表格烦恼——让我们的数据查看器在浏览器中将原始数字转化为清晰洞察。只需从 PC-Gentec-EO 导入您的数据日志文件，即可立即通过清晰的图表、详细的参数和有用的统计数据来可视化您的激光测量。
为什么要使用它？
- 放大任何数据片段以进行深入分析
- 几秒内访问详细的测量参数和趋势
- 获取可直接用于报告或故障排查的可视化洞察
- 同时打开并比较多个日志文件
包括 NIST 可追溯校准
可追溯校准可将激光输出测量的读数追溯到美国国家标准与技术研究院（NIST）确定的已知国际测量标准。这确保了仪器测量的可靠性和准确性。
其优势包括：
- 对组织内外其他仪器的测量结果进行有效比较，并对不同时间的测量结果进行比较
- 符合法规或行业标准
- 避免在运行中出现代价高昂的测量错误
- 增强客户对激光系统的信心
- 确保实验室实验的有效性
- 利用我们提供的校准证书，轻松证明测量的准确性
INTEGRA（USB 或 RS-232）输出选择
当您选择 INTEGRA 输出选项时，您将获得集检测器和仪表于一体的便捷的一体化测量仪器产品。将检测器插入电脑，安装我们的免费软件，即可开始测量。
为何如此选择？
- 最具成本效益的解决方案
- 与其他解决方案具有相同的测量性能
- 接口功能和特性不打折扣
- 适用于 OEM 应用和现场维修的紧凑型解决方案
- 多功能仪器可节省重新校准的费用
