QE65
2D CAD file (PDF)
- 9009A
- 英文
QE65LP-H-MB-D0
P/N 201253Pyroelectric detector for laser energy measurement up to 25 J.
-
- 3.7 mm Ø
- 50 mm Ø
- 95 mm Ø (90 mm Ø)
- 195 mm Ø (185 mm Ø)
- 7.8 x 7.8 mm
- 12 x 12 mm (9 x 9 mm)
- 25 x 25 mm (22 x 22 mm)
- 50 x 50 mm (47 x 47 mm)
- 65 x 65 mm (62 x 62 mm)
-
- 传送
- 散热片
- 水
-
- MB - 标准
- MB - 标准（调整为长脉冲）
- BL - 光谱平坦
- MB - 标准（调整为短脉冲）
- MT - 高重复率
- MT - 高重复率（调整为短脉冲）
-
- 无
- QED - 高能量衰减器
-
- Standard
- INTEGRA (USB)
- INTEGRA (RS-232)
- INTEGRA（带有外部触发器的 USB）
- BLU（无线）
可追溯校准
适用于
Product family key features
Modular Concept
Increase the power capability of your detector: 2 different cooling modules
Large Aperture
Effective aperture of 65 x 65 mm
QED Attenuator Available
Measure up to 5X higher energies. Available with optional calibration, all wavelengths between 532 & 1064 nm, or single wavelength. Read more.
Low Noise Level
10 µJ for the MB coating
Test Target Included
With the MB models
Smart Interface
Containing all the calibration data
Compatible stand
Compatible displays & PC interfaces
-
MIRO ALTITUDE
Touchscreen display device for power & energy measurement. Single-channel.
-
MAESTRO
Touchscreen display device for power & energy measurement. Single-channel, multiple outputs (USB, Ethernet, analog).
-
U-LINK (USB)
PC interface for power & energy measurement. Single-channel, USB output.
-
U-LINK (RS-232)
PC interface for power & energy measurement. Single-channel, RS-232 output.
-
INTEGRA
Embedded PC interface for power & energy measurement. Can only be purchased as a detector output option.
-
S-LINK-1 (Ethernet)
PC interface for power & energy measurement. Single-channel, USB & Ethernet output.
-
S-LINK-2 (Ethernet)
PC interface for power & energy measurement. Dual-channel, USB & Ethernet output.
-
M-LINK
PC interface for power & energy measurement. Single-channel, USB output.
-
S-LINK-1
PC interface for power & energy measurement. Single-channel, USB output.
-
S-LINK-2
PC interface for power & energy measurement. Dual-channel, USB output.
包括
-
Calibration
Calibration certificate
-
PWC
Personal wavelength correctionTM Certificate
-
COVER
Protective cover for optical surfaces
-
TEST-TARGET
A target with the same optical absorber as your QE-MB detector.
Measurement capabilities
-
Spectral range1
0.193 - 20 μm -
Typical rise time
1 ms -
Repeatability
<0.5% -
Maximum repetition frequency
100 Hz -
Maximum measurable energy2
25 J -
Noise equivalent energy3
10 μJ -
Maximum pulse width
0.7 ms -
Energy calibration uncertainty
±3 % -
- 1. For the calibrated spectral range, see the user manual.
- 2. At 1064 nm, 7 ns, single-shot. Increasing pulse width increases maximum measurable energy.
- 3. Nominal value. Actual value depends on electrical noise in the measurement system.
Damage thresholds
-
Maximum average power density1
10 W/cm² -
Maximum energy density2
0.6 J/cm² -
Maximum power
40 W -
- 1. May vary with wavelength and average power.
- 2. At 1064 nm, 7 ns, 10 Hz. May vary with wavelength and pulse width.
Physical characteristics
-
Cooling
Convection (heatsink) -
Aperture width
65 mm -
Aperture height
65 mm -
Absorber
MB -
Dimensions
92H x 92W x 99D mm -
Weight
0.9 kg
-
STAND-D-443
Stand with 4 x 4in base, 3in cylinder, delrin post, ¼-20 & 8-32.
DB15-BNC
DB15 to BNC (male) adaptor for QE series.
QED-65
Broadband attenuator for QE65 Series. 300-2100 nm.
NAN-915
Hardshell, waterproof carrying case with padded dividers. Internal size 13 L (351 mm x 236 mm x 157 mm).
-
How calibration works
Technical note
- 2025
- 英文
How pyroelectric detectors work
Technical note
- 英文
Measuring laser pulse energy with a pyroelectric detector: The basics!
Technical note
- 202203
- 英文
QED Attenuators for QE Series
Technical note
- 2025
- 英文
Recalibration options when using an extension cable
Technical note
- 202176
- 英文
Understanding the spectral characteristics of your detectors
Technical note
- 202202
- 英文
Energy detectors - overview
Comparison table
- 2025
- 英文
Understanding your calibration certificate
Technical note
- 202184B
- 英文
Calibration: For measurements you can count on
Technical note
- 英文
Same laser, same detector: A measure of repeatability
Technical note
- 2026
- 英文
-
PC-Gentec-EO
Software
Software for BLU, HP, INTEGRA, MAESTRO, U-LINK and P-LINK series. Don't forget to download and install the USB Drivers.
- 2.01.26
- 英文
Integra
LabVIEW VI examples
LabVIEW VI examples for 9.0+
- 1.00.04
- 英文
USB drivers installer
USB drivers
Use this file to install USB drivers for these products: MAESTRO, INTEGRA, U-LINK, P-LINK, M-LINK, S-LINK, BLU, PRONTO, HP
- 2.00.04
- 英文
Integra
Python examples
Python examples for INTEGRA.
- 1.00.00
- 英文
Serial command examples in C for HP and INTEGRA
Code example
- 1.00.00
- 英文
具有较高损伤阈值的宽带吸收器
该检测器采用 MB 吸收器，具有较高的损伤阈值和光谱平坦的宽带响应，使该能量检测器成为可满足多种激光能量测量需求的多功能解决方案。
可为客户提供以下优势：
- 损坏设备的风险较低
- 可用于测量各种激光的能量
深入了解您的激光行为
不再为电子表格烦恼——让我们的数据查看器在浏览器中将原始数字转化为清晰洞察。只需从 PC-Gentec-EO 导入您的数据日志文件，即可立即通过清晰的图表、详细的参数和有用的统计数据来可视化您的激光测量。
为什么要使用它？
- 放大任何数据片段以进行深入分析
- 几秒内访问详细的测量参数和趋势
- 获取可直接用于报告或故障排查的可视化洞察
- 同时打开并比较多个日志文件
包括 NIST 可追溯校准
可追溯校准可将激光输出测量的读数追溯到美国国家标准与技术研究院（NIST）确定的已知国际测量标准。这确保了仪器测量的可靠性和准确性。
其优势包括：
- 对组织内外其他仪器的测量结果进行有效比较，并对不同时间的测量结果进行比较
- 符合法规或行业标准
- 避免在运行中出现代价高昂的测量错误
- 增强客户对激光系统的信心
- 确保实验室实验的有效性
- 利用我们提供的校准证书，轻松证明测量的准确性
INTEGRA（USB 或 RS-232）输出选择
当您选择 INTEGRA 输出选项时，您将获得集检测器和仪表于一体的便捷的一体化测量仪器产品。将检测器插入电脑，安装我们的免费软件，即可开始测量。
为何如此选择？
- 最具成本效益的解决方案
- 与其他解决方案具有相同的测量性能
- 接口功能和特性不打折扣
- 适用于 OEM 应用和现场维修的紧凑型解决方案
- 多功能仪器可节省重新校准的费用
