Energy detectors
흡수 곡선
Absorption curves for energy detectors
- 2024
- 영어
UM9B-BL-L-D0
P/N 202241최대 200 µW의 레이저 파워 계측용 초전기 검출기.
Traceable calibration:
제품군 주요 특징
Very Low Noise Level
Noise levels of a photo detector, but with the large bandwidth of a pyroelectric: down to 5 nW when using the analog power module (APM).
Very High Responsivity
Up to 20 000 V/W when using the analog power module (APM)
Very Large Bandwidth
From DUV to FIR thanks to pyroelectric technology
Smart Interface
Containing all the calibration data
호환 스탠드
호환 디스플레이 장치 및 PC 인터페이스
-
APM (D)
Analog power module, to interface -B heads with oscilloscopes and lock-in amplifiers.
관련 상품
-
SDC-500
Digital optical chopper.
계측 성능
-
최대 평균 파워(연속)
200 μW -
등가노이즈파워(NEP)
5 nW -
스펙트럼 범위1
0.1 - 20 μm -
일반 상승 시간
0.2 s -
일반 파워 감도
20000 mV/W -
파워 교정 불확정성2
±4 % -
초퍼 주파수3
5 ± 1 Hz -
- 1. 교정된 스펙트럼 범위는 사용설명서를 참조하십시오.
- 2. 633nm.
- 3. SDC-500 디지털 광학식 초퍼는 별도로 판매됩니다.
손상 한계
-
최대 평균 파워 밀도
50 mW/cm²
물리적 특성
-
구경 지름
9 mm -
업소버
BL -
치수
38.1Ø X 79D mm -
중량
0.09 kg
CA$1,952.00*
-
STAND-D-233
Stand with 2 x 3in base, 3in cylinder, delrin post, ¼-20 & 8-32.
FOA-FULL-FC
Fiber optic adaptor FC/PC with full cover. For: XLP12, UP10, IS12, PH, PE, UM, QE8, THZ9D, BEAMAGE-4M.
FOA-FULL-SMA
Fiber optic adaptor SMA with full cover. For: XLP12, UP10, IS12, PH, PE, UM, QE8, THZ9D, BEAMAGE-4M.
FOA-FULL-ST
Fiber optic adaptor ST with full cover. For: XLP12, UP10, IS12, PH, PE, UM, QE8, THZ9D, BEAMAGE-4M.
XLP12-TUBE
Isolation tube for XLP12 series. Can be used with any detector having a SM1-threaded aperture. Includes XLP12 series, UP...
FOA-FULL-FCA
Fiber optic adaptor FC/APC with full cover. For: XLP12, UP10, IS12, PH, PE, UM, QE8, THZ9D, BEAMAGE-4M.
-
이 제품에 대해 다운로드할 문서가 없습니다. 자세한 기술 관련 내용은 자사에 문의하십시오.
NIST-TRACEABLE CALIBRATION INCLUDED
Traceable calibration provides the ability to trace the readings of laser output measurements to known international measurement standards determined by the National Institute of Standards and Technology (NIST). This ensures that the measurements taken by the instruments are reliable and accurate.
Benefits include:
- Make valid comparisons of measurements taken by other instruments inside and outside your organization and over time
- Comply with regulations or conform to industry standards
- Avoid costly measurement mistakes in your operations
- Improve customer confidence in your laser systems
- Ensure laboratory experiment validity
- Demonstrate measurement accuracy easily with the calibration certificate we provide
관련 영상
필요한 호환 제품
STAND-D-233
Stand with 2 x 3in base, 3in cylinder, delrin post, ¼-20 & 8-32.
APM (D)
디스플레이: 없음
채널 수: 1
출력 유형: 아날로그
계측 유형: 평균 출력, 펄스 에너지
FOA-FULL-FC
Fiber optic adaptor FC/PC with full cover. For: XLP12, UP10, IS12, PH, PE, UM, QE8, THZ9D, BEAMAGE-4M.
FOA-FULL-SMA
Fiber optic adaptor SMA with full cover. For: XLP12, UP10, IS12, PH, PE, UM, QE8, THZ9D, BEAMAGE-4M.
FOA-FULL-ST
Fiber optic adaptor ST with full cover. For: XLP12, UP10, IS12, PH, PE, UM, QE8, THZ9D, BEAMAGE-4M.
PEL-#
펠리컨 운반용기. 다양한 크기 제공. 주문 문의.
SDC-500
Digital optical chopper.
XLP12-TUBE
Isolation tube for XLP12 series. Can be used with any detector having a SM1-threaded aperture. Includes XLP12 series, UP...
FOA-FULL-FCA
Fiber optic adaptor FC/APC with full cover. For: XLP12, UP10, IS12, PH, PE, UM, QE8, THZ9D, BEAMAGE-4M.
*Does not include shipping fees, import fees or local representation. Request quote for full details and local sales contact.
Your item has been added to your cart!
You might need these specific products to be able to use the placeholder only.
Compatible products
No compatible product
