Your item has been added to your cart!

You might need these specific products to be able to use the placeholder only.

Compatible products you may need

No compatible product

HP100A-4KW-HE-TUBE

P/N 203151M

High power detector for laser power measurement up to 4000 W. Includes extension tube to reduce back reflections.

    • QBH
    • 60 mm Ø
    • 100 mm Ø
    • 250 mm Ø
    • 125 x 125 mm
    • 280 x 280 mm
    • 500 x 500 mm
    • HE - 광대역, 고파워
    • HD - 광대역, 고파워
    • GD - 고전력밀도, 큰 콘
    • GD - 고전력밀도, 작은 콘
    • 기본 (TUBE 제외)
    • 미터법
    • 야드/파운드법
    • Standard (DB15) + USB
    • BLU (DB15 + 무선)
HP100A-4KW-HE-TUBE HP100A-4KW-HE-TUBE HP100A-4KW-HE-TUBE HP100A-4KW-HE-TUBE HP100A-4KW-HE-TUBE HP100A-4KW-HE-TUBE HP100A-4KW-HE-TUBE HP100A-4KW-HE-TUBE HP100A-4KW-HE-TUBE HP100A-4KW-HE-TUBE HP100A-4KW-HE-TUBE HP100A-4KW-HE-TUBE HP100A-4KW-HE-TUBE HP100A-4KW-HE-TUBE HP100A-4KW-HE-TUBE HP100A-4KW-HE-TUBE HP100A-4KW-HE-TUBE HP100A-4KW-HE-TUBE

추적 가능 교정

Logo nist

Product family key features

High Power Handling

Handles up to 30 kW of continuous power with our standard models. Custom models are available for higher powers (See SUPER HP).

Stable Reading

Less sensitive to variations in water cooling temperature than any other high-power water-cooled meter on the market

Large Aperture

Our standard HP models (4KW, 12KW, 15KW and 30KW) have a very large effective aperture of up to 280 mm to accommodate even the largest laser beams. Larger apertures with various shapes are available upon request (See SUPER HP).

Available with YAG and CO2 Calibration

All HP Models can be calibrated at YAG and CO2 wavelengths with a calibration uncertainty of +/- 5%

Direct USB Connection to a PC

Each head comes with both a DB-15 connector (for use with a Gentec-EO monitor) and a USB2.0 output for direct connection to a PC.

 

Compatible stand

Compatible displays & PC interfaces

  • MAESTRO MAESTRO

    Touchscreen display device for power & energy measurement. Single-channel, multiple outputs (USB, Ethernet, analog).

  • TUNER TUNER

    Display device with tuning needle for power measurement. Single-channel.

  • UNO UNO

    Economical display device for power measurement. Single-channel.

포함

  • Calibration certificate

  • Transport case

  • Personal wavelength correctionTM Certificate

  • Protective cover for optical surfaces

  • HP-W-ADAPTOR-3/8-10mm HP-W-ADAPTOR-3/8-10mm

    Adaptor for water fittings of HP series. Changes the thread from imperial (3/8") to metric (10 mm OD). One unit of this item corresponds to two of the described tubes.

Measurement capabilities

  • Maximum average power (continuous)

    4000 W
  • Minimum average power1

    100 W
  • Noise equivalent power2

    3 W
  • Spectral range

    0.193 - 20 μm
  • Typical rise time

    7 s
  • Typical power sensitivity

    0.4 mV/W
  • Power calibration uncertainty

    ±5 %
  • Repeatability

    ±2 %
  • Back reflections

    < 4 %
  • Linearity with power

    ±1.5 %
  • Linearity vs beam diameter

    ±1 %
  • Linearity vs beam position3

    ±1.7 %
    • 1. For lower powers, call your Gentec-EO representative.
    • 2. Nominal value. Actual value depends on electrical noise in the measurement system.
    • 3. For a beam size of 20% of the aperture area, moved across 80% of the aperture area.

Water requirements

  • Required cooling flow1

    (4 - 6) LPM < ±1 LPM/min
  • Temperature range

    15 – 25 °C
  • Rate of temperature change

    < ±3°C/min
  • Maximum water pressure

    413 kPa (60 psi)
    • 1. Contact Gentec-EO for clean deionized water cooling module option.

Damage thresholds

  • Maximum average power density1

    10 kW/cm²
    • 1. At 1064 nm, 1.07-1.08 µm and 10.6 µm, 500 W CW. Refer to user manual for damage threshold at other powers. May vary with wavelength and average power.

Controller and GUI specifications

  • Data display

    Real time, scope, needle, averaging, histogram and statistics
  • Analog output1

    0-2 Volts
  • Serial commands via

    USB
  • External power supply2

    Through USB or Gentec-EO displays & PC interfaces
  • Display type

    None
    • 1. 12 V maximum output signal available upon request.
    • 2. A USB power adaptor will be necessary if the HP is used with a DB-15 extension cable.

Physical characteristics

  • Cooling

    Water
  • Aperture diameter

    70 mm
  • Absorber

    HE
  • Dimensions

    127H x 127W x 234D mm
  • Weight

    6 kg

Price: CA$6,228.00

주문하기 전에 리드타임을 요청하세요.

평균 출력 밀도가 높은 레이저 애플리케이션에 사용하기 위한 설계

당사의 HE 흡수기는 광대역이고 플랫한 스펙트럼 반응을 제공하므로 다양한 고출력 레이저 측정 요구 사항을 충족할 수 있는 솔루션입니다. 또한 당사의 독자적인 제조 방식을 통해 평균 출력 밀도와 에너지 밀도 모두에서 우수한 손상 임곗값을 제공합니다.

고객 만족 기능:

  • 넒은 범위의 레이저 측정에 유용
  • 장비 손상 위험이 낮음
 
 

기본 제공되는 PC-Gentec-EO 소프트웨어로 사용

무료 전용 소프트웨어인 PC-Gentec-EO로 사용자의 PC에서 직접 측정값을 확인할 수 있습니다. 이 소프트웨어는 다음 제품 시리즈를 지원합니다: P-LINK, HP, INTEGRA, U-LINK 및 MAESTRO.

편리한 기능:

  • 실용적인 디스플레이: 실시간, 범위, 표시침, 평균, 히스토그램 및 통계
  • 데이터 로깅 및 보정 계수와 같은 유용한 기능
  • 다양한 통계 사용 가능: 전류값, 평균값, 최댓값, 최솟값, RMS 안정성, PTP 안정성, 반복률, 평균 출력 및 STD 편차

 

자세히 알아보기

XNR AnticipationTM으로 빠른 측정

XNR AnticipationTM으로 최대 10배 빠른 레이저 파워 측정(모델에 따라 다름)이 가능합니다. 당사의 독자적인 알고리즘은 신호가 증가하거나 감소하는 속도를 살피고 이를 교정 데이터와 결합하여 결과를 예측합니다. 따라서 측정값은 감지기의 자연스러운 반응보다 빠르게 계산되어 표시됩니다.

중요한가요?

  • 각 측정 때마다 몇 초에서 수십 초까지 절약됩니다
  • 운영 중단 시간을 단축합니다
  • 더 빠른 레이저 출력 진단이 가능합니다
  • 생산성을 향상합니다
  • 측정 정확도의 저하가 없습니다

NIST 추적 가능 교정 포함

추적 가능 교정은 레이저 출력 측정값을 미국 국립표준기술원(NIST)에서 정한 국제 측정 표준에 따라 추적할 수 있는 기능을 제공합니다. 이를 통해 계측기의 측정값이 신뢰할 수 있고 정확하다는 것을 보장합니다.

이점:

  • 조직 내부나 외부의 다른 기기에서 측정한 측정값에 대해 시간 경과에 따른 유효성 비교를 수행합니다
  • 규정 또는 업계 표준을 준수합니다
  • 운영 과정에서 비용이 많이 드는 측정 실수를 방지합니다
  • 레이저 시스템에 대한 고객 신뢰도를 향상합니다
  • 실험실 실험의 유효성을 보장합니다
  • 당사가 제공하는 교정 인증서로 측정 정확도를 쉽게 입증할 수 있습니다

 

자세히 알아보기

Related videos

모든 동영상

Compatible products you may need

*배송비, 수입 수수료 또는 현지 대리점 비용은 포함되지 않았습니다. 자세한 내용 및 현지 영업소 연락처는 견적을 요청하세요.

Check if this product works for your laser

Measurement type:

1

Beam size

2

Laser type

3

Beam profile

COPYRIGHT ©2026 Gentec-eo Spektrum média