IS12L-9S-RSi
2D CAD file (PDF)
- 9965
- 英語
IS12L-9S-RSi-INT-D0
P/N 203203Integrating sphere detector for laser power measurement up to 9 W.
-
- 12 mm Ø
- 50 mm Ø
-
- 対流
- 水
-
- シリコン
-
- INTEGRA（USB）
- INTEGRA（RS-232）
- INTEGRA（外部トリガー付USB）
- BLU（ワイヤレス）
トレーサブル較正
付属品：
Product family key features
Fastest response
With their silicon sensors, the IS detectors are as fast as photodiodes.
High average power
Two sizes are available, both with high average power capabilities:
- 12 mm aperture for up to 9 W of continuous power
- 50 mm aperture for up to 1000 W of continuous power
Resistant coating
Our proprietary coating is designed to be strong. Its damage thresholds are orders of magnitude higher than any other "white" coatings on the market.
Precise calibration
The IS detectors have a NIST-traceable calibration for their entire calibrated spectral range. Temperature compensation completes the calibration to give you the most accurate and stable measurements.
Choice of output
The IS detectors are available with two output options:
- INTEGRA with USB output (-INT)
- INTEGRA with RS-232 output (-IDR)
Award-winning technology
The laser power detectors in the IS series were recognized among the best solutions on the market by an esteemed and experienced panel of judges from the optics and photonics community at the 2022 Laser Focus World Innovators Awards.
Compatible stand
Compatible displays & PC interfaces
-
INTEGRA
Embedded PC interface for power & energy measurement. Can only be purchased as a detector output option.
含まれるもの
-
Calibration
Calibration certificate
-
PWC
Personal wavelength correctionTM Certificate
-
COVER
Protective cover for optical surfaces
Measurement capabilities
-
Maximum average power (continuous)
9 W -
Noise equivalent power1
1 μW -
Spectral range
340 - 1100 nm -
Typical rise time
0.2 s -
Power calibration uncertainty
±5.0 % (405 - 499 nm)
±3.5 % (500 - 1069 nm)
±2.5 % (1070 nm) -
Linearity with power
±1 % -
Sphere inner diameter
50 mm Ø -
Maximum incidence angle
± 10° -
Maximum divergence
10° (half-angle) -
Power calibration uncertainty
±5.0 % (405 - 499 nm)
±3.5 % (500 - 1069 nm)
±2.5 % (1070 nm) -
Calibrated spectral range
405 - 1070 nm -
Back reflections
6 %, concentrated in a cone with 7.5 degrees half-angle -
- 1. At 1070 nm. Nominal value. Actual value depends on environmental electromagnetic interference and wavelength.
Damage thresholds
-
Maximum average power density1
2 kW/cm² -
Maximum energy density2
400 mJ/cm² -
- 1. At 1064 - 1070 nm, CW. May vary with wavelength and average power.
- 2. At 1064 - 1070 nm, 7 ns. May vary with wavelength and pulse width.
Physical characteristics
-
Cooling
Convection -
Aperture diameter
12 mm -
Absorber
Si -
Dimensions
66H x 78W x 66D mm -
Weight
0.7 kg
Price: CA$2,010.00
ご注文前に納期をお問い合わせください。
-
NAN-915
Hardshell, waterproof carrying case with padded dividers. Internal size 13 L (351 mm x 236 mm x 157 mm).
FOA-FULL-FC
Fiber optic adaptor FC/PC with SM1 external thread. For: XLP12, UP10, IS12, UP25, PH, PE, UM, QE8, THZ9D, BEAMAGE-4M. Al...
Price: $167
FOA-FULL-SMA
Fiber optic adaptor SMA with SM1 external thread. For: XLP12, UP10, IS12, UP25, PH, PE, UM, QE8, THZ9D, BEAMAGE-4M. Also...
Price: $163
FOA-FULL-ST
Fiber optic adaptor ST with SM1 external thread. For: XLP12, UP10, IS12, UP25, PH, PE, UM, QE8, THZ9D, BEAMAGE-4M. Also ...
Price: $163
XLP12-TUBE
Isolation tube for XLP12 series. Can be used with any detector having a SM1-threaded aperture. Includes XLP12 series, UP...
Price: $49
FOA-FULL-FCA
Fiber optic adaptor FC/APC with SM1 external thread. For: XLP12, UP10, IS12, UP25, PH, PE, UM, QE8, THZ9D, BEAMAGE-4M. A...
Price: $167 -
Calibration Uncertainty of Photodetectors
Technical note
- 202174
- 英語
How calibration works
Technical note
- 2025
- 英語
Understanding the spectral characteristics of your detectors
Technical note
- 202202
- 英語
Power detectors - overview
Comparison table
- 2025
- 英語
Measuring laser power with the IS series: a versatile solution with fast response
Technical note
- 英語
Understanding your calibration certificate
Technical note
- 202184B
- 英語
Calibration: For measurements you can count on
Technical note
- 英語
-
PC-Gentec-EO
Software
Software for BLU, HP, INTEGRA, MAESTRO, U-LINK and P-LINK series. Don't forget to download and install the USB Drivers.
- 2.01.26
- 英語
Integra
LabVIEW VI examples
LabVIEW VI examples for 9.0+
- 1.00.04
- 英語
USB drivers installer
USB drivers
Use this file to install USB drivers for these products: MAESTRO, INTEGRA, U-LINK, P-LINK, M-LINK, S-LINK, BLU, PRONTO, HP
- 2.00.04
- 英語
Integra
Python examples
Python examples for INTEGRA.
- 1.00.00
- 英語
Serial command examples in C for HP and INTEGRA
Code example
- 1.00.00
- 英語
AWARD-WINNING TECHNOLOGY
The laser power detectors in the IS series were recognized among the best solutions on the market by an esteemed and experienced panel of judges from the optics and photonics community at the 2022 Laser Focus World Innovators Awards.
The IS series opens up new measurement possibilities such as following the complete ramp-up of high-power laser sources, or tracking fast changes in kW-level laser power. The integrating sphere’s proprietary coating was designed to handle high laser power density, and its NIST-traceable calibration provides accurate, reliable results.
Measure from low powers to the multi-kilowatt level with a single device
The broad dynamic range and very low noise equivalent power (NEP) of the IS integrating spheres provide users the ability to measure several lasers with different average powers with only one device.
Benefits:
- Outstanding signal-to-noise ratios (SNR)
- No need to change detector or manage attenuation when the measured power spans a wide range
- Lower initial and maintenance costs compared to buying multiple detectors to cover the same range
Monitor high-power lasers at high speed
Thanks to their photodiode-based sensor, power meters of the IS series measure in under 200 ms, tens of times faster than with thermal detectors.
Benefits:
- Faster measurements: no need to wait for the detector to stabilize
- Discern quick changes in laser power
- Follow the ramp-up of high-power sources
- Increased productivity
Diffused back-reflections confined in an angular cone
While thermal detectors and water calorimeters diffusely reflect 10% to 15% of the incoming light in a Lambertian manner, integrating spheres of the IS series reflect only 6% to 12% more directionally through their optical aperture. This helps improve safety in the measurement environment by making it easier to deal with back reflections.
シリコン吸収体とISシリーズにより、VIS-NIR領域で高速応答
VIS-NIR波長に高速応答するフォトダイオードベースの検出器。当社のシリコン吸収体は、マイクロワットレベルの非常に低い電力の測定を可能にします。市販のどの「ホワイト」コーティングよりも高い損傷閾値。
お客様のメリット：
- 優れたダイナミックレンジ
- 迅速な応答
- 角度による後方反射の低減
- 高損傷閾値
レーザーの動作を深く理解する
スプレッドシートに悩まされるのはもうやめましょう。私たちのデータビューアが、生の数値をブラウザー上でそのまま分かりやすいインサイトに変換します。PC-Gentec-EO からデータログファイルをインポートするだけで、きれいなグラフ、詳細なパラメーター、有用な統計とともにレーザー測定を即座に可視化できます。
なぜ使うべき？
- 任意の部分を拡大して集中的に分析できる
- 詳細な測定パラメーターやトレンドに数秒でアクセスできる
- レポートやトラブルシューティングにすぐ使える視覚的インサイトを取得できる
- 複数のログファイルを同時に開いて比較できる
NISTトレーサブル較正付き
トレーサブル較正では、米国国立標準技術研究所 (NIST) により決定された既知の国際測定基準に対してレーザー出力測定の測定値をトレースすることができます。これにより、機器による測定の信頼性と正確性が保証されます。
利点：
- 組織内外の他の機器によって長期間行われた測定の妥当な比較の実施
- 規制への準拠、または業界標準への適合
- 業務におけるコストのかかる測定ミスの回避
- レーザー システムに対する顧客の信頼性向上
- ラボにおける実験の妥当性確保
- 当社が提供する較正証明書により、測定精度の証明が簡単
オプションの INTEGRA (USBまたはRS-232) 出力
INTEGRA出力オプションを選択すると、検出器とメーターが一体化した便利なオールインワン機器を入手できます。検出器をPCに接続し、無料のソフトウェアをインストールして測定を開始します。
選ぶ理由
- 最もコスト効率の高いソリューション
- 他のソリューションと同等の測定性能
- 妥協のないインターフェースの機能と特徴
- OEMアプリケーションおよびフィールドサービス向けのコンパクトなソリューション
- オールインワンの機器で再較正にかかるコストを節約
Related videos
Compatible products you may need
*送料、輸入手数料、現地代理店手数料は含まれていません。詳細および現地販売連絡先については、見積書をご請求ください。
