Energy detectors
Absorption curves
Absorption curves for energy detectors
- 2025
- Английский
Temperature-controlled pyroelectric detector for laser power measurement from nW to 0.5 mW.
These radiometers were developed for NIST, to be used with a broadband spectrometer to act as a spectral transfer standard when calibrating other detectors in the 0.25 to 15 μm range.
Each head is composed of a low noise detector, thermistor, TE cooler and heatsink to compensate for any temperature change
Temperature control down to 0.05°C from 20 to 30°C gives a temperature coefficient <0.01 %, thus a voltage output stable to 0.01 %
Plug your TP sensor into the STEP-Controller for power supply and temperature control. You can then use the analog output with a scope or lock-in
Power supply and temperature control for TP series detectors.
Hardshell, waterproof carrying case with padded dividers. Internal size 13 L (351 mm x 236 mm x 157 mm).
There is no user manual available for this product.
You might need these specific products to be able to use the placeholder only.
No compatible product