UP19K
2D CAD file (PDF)
- 8477K
- Английский
UP19K-30H-VR-D0
P/N 201148Thermal detector for laser power measurement up to 30 W.
-
- 10 mm Ø
- 12 mm Ø
- 16 - 19 mm Ø
- 25 mm Ø
- 50 - 55 mm Ø
- 100 mm Ø
-
- Convection (up to 15 W)
- Heatsink (up to 30 W)
- Large Heatsink (up to 50 W)
- Fan (up to 110 W)
- Water (up to 200 W)
- Convection - compact casing (up to 6 W)
- Water – large casing
-
- H - Broadband
- W - Very high power density
- VR - High energy density
- QED - High energy density
- F - IR filter
- HD - Broadband, high power
- VP - Ultrashort Pulses
-
- Standard
- INTEGRA (USB)
- INTEGRA (RS-232)
- INTEGRA (USB с внешним триггером)
- BLU (беспроводной)
Traceable calibration:
Available with
Ключевые особенности семейства продуктов
This product has been superseded. Check this page for the new product.
Modular Concept
Increase the power capability of your detector: 2 different cooling modules
High Peak Power Volume Absorber
Perfect for high density beams
Compact Design
Only 21 mm thick (15S model)
Energy Mode
Measure single shot energy up to 40 J
Smart Interface
Containing all the calibration data
Совместимая подставка
Совместимые экраны & интерфейсы ПК
-
MIRO ALTITUDE
Touchscreen display device for power & energy measurement. Single-channel.
-
MAESTRO
Touchscreen display device for power & energy measurement. Single-channel, multiple outputs (USB, Ethernet, analog).
-
U-LINK (USB)
PC interface for power & energy measurement. Single-channel, USB output.
-
U-LINK (RS-232)
PC interface for power & energy measurement. Single-channel, RS-232 output.
-
INTEGRA
Embedded PC interface for power & energy measurement. Can only be purchased as a detector output option.
-
BLU
Embedded wireless interface for power measurement. Can only be purchased as a detector output option.
-
TUNER
Display device with tuning needle for power measurement. Single-channel.
-
UNO
Economical display device for power measurement. Single-channel.
-
P-LINK (USB)
PC interface for power measurement. Single-channel, USB output.
-
P-LINK (RS-232)
PC interface for power measurement. Single-channel, RS-232 output.
-
S-LINK-1 (Ethernet)
PC interface for power & energy measurement. Single-channel, USB & Ethernet output.
-
S-LINK-2 (Ethernet)
PC interface for power & energy measurement. Dual-channel, USB & Ethernet output.
-
M-LINK
PC interface for power & energy measurement. Single-channel, USB output.
-
S-LINK-1
PC interface for power & energy measurement. Single-channel, USB output.
-
S-LINK-2
PC interface for power & energy measurement. Dual-channel, USB output.
-
P-LINK-4 (USB)
PC interface for power measurement. Four channels.
Included
-
Calibration
Calibration certificate
-
PWC
Personal wavelength correctionTM Certificate
-
COVER
Protective cover for optical surfaces
Руководство пользователя
Возможности измерения
-
Максимальная средняя мощность (длительная)
30 W -
Максимальная средняя мощность (1 минута)
35 W -
Эквивалентная мощность шума
2 mW -
Спектральный диапазон
0,3 - 2,5 μm -
Типичное время нарастания
2.5 s -
Неопределенность калибровки мощности
±2.5 % -
Повторяемость
±0.5 %
Возможности измерения (энергетический режим)
-
Максимальная измеряемая энергия
40 J -
Эквивалентная энергия шума
0,02 J -
Минимальный период повторения
4,5 s -
Максимальная ширина импульса
90 ms -
Неопределенность калибровки энергии
±5 %
Пределы прочности
-
Максимальная средняя плотность мощности
700 W/cm² -
Максимальная плотность энергии
6 J/cm²
Физические характеристики
-
Охлаждение
Конвекция (радиатор) -
Диаметр диафрагмы
18 mm -
Абсорбер
VR -
Размеры
50H x 50W x 56.3D mm -
Вес
0,21 kg
-
UP19K-30H-H5, UP19K-30H-W5, UP19K-30H-VR
3D model (STEP)
- 9658A
- Английский
BLU
2D CAD file (PDF)
- 9770C
- Английский
UP19K-30H-H5-BLU, UP19K-30H-W5-BLU, UP19K-30H-VR-BLU
3D model (STEP)
- 9722
- Английский
Power detectors
Absorption curves
Absorption curves for power detectors
- 2025
- Английский
INTEGRA module
3D model (STEP)
- 9875
- Английский
INTEGRA module for UP series
2D CAD file (PDF)
- 9559C
- Английский
-
There is no user manual available for this product.
-
How calibration works
Technical note
- 2025
- Английский
How thermopile power detectors work
Technical note
- Английский
Linearity with power of Gentec-EO's thermal laser power detectors
Technical note
- 202206A
- Английский
Measuring high powers with low power detectors
Technical note
- 202188
- Английский
Measuring laser power with a thermopile detector: The basics!
Technical note
- 202175
- Английский
Recalibration options when using an extension cable
Technical note
- 202176
- Английский
Understanding the spectral characteristics of your detectors
Technical note
- 202202
- Английский
Power detectors - overview
Comparison table
- 2025
- Английский
Understanding your calibration certificate
Technical note
- 202184B
- Английский
Calibration: For measurements you can count on
Technical note
- Английский
Same laser, same detector: A measure of repeatability
Technical note
- 2026
- Английский
-
PC-Gentec-EO
Software
Software for BLU, HP, INTEGRA, MAESTRO, U-LINK and P-LINK series. Don't forget to download and install the USB Drivers.
- 2.01.26
- Английский
Integra
LabVIEW VI examples
LabVIEW VI examples for 9.0+
- 1.00.04
- Английский
USB drivers installer
USB drivers
Use this file to install USB drivers for these products: MAESTRO, INTEGRA, U-LINK, P-LINK, M-LINK, S-LINK, BLU, PRONTO, HP
- 2.00.06
- Английский
Integra
Python examples
Python examples for INTEGRA.
- 1.00.00
- Английский
Serial command examples in C for HP and INTEGRA
Code example
- 1.00.00
- Английский
Faster measurement with XNR AnticipationTM
Measure laser power up to 10x faster (model-dependant) with XNR AnticipationTM. Our proprietary algorithm looks at the rate at which the signal increases or decreases and combines this with calibration data to predict the result. The measurement is therefore calculated and displayed faster than the natural response of the detector.
Why does it matter?
- Save several seconds to tens of seconds for each measurement
- Shorter operation interruption
- Faster laser output diagnostics
- Increased productivity
- No compromise on measurement accuracy
Связанные видео
Часто задаваемые вопросы
-
What is this product used for?
The UP19K-30H-VR-D0 is used to measure laser power up to 30 W with a UP19 VR volume absorber and heatsink cooling. It is intended for pulsed, high-energy-density beams needing more heat handling than the 15S VR model. -
What are its key specifications?
Key UP19K-30H-VR-D0 specifications include 30 W continuous power, 35 W for 1 minute, 18 mm aperture, heatsink cooling, VR absorber, 0.3–2.5 µm spectral range, 2 mW noise equivalent power, 2.5 s rise time, ±2.5% calibration uncertainty, ±0.5% repeatability, and energy mode up to 40 J. -
How do I choose this model vs another?
Choose this model when you need VR absorber performance with more cooling than the standalone version. Choose H or W absorber families if broadband wavelength range or very high surface power-density handling is more important. -
What accessories/options are compatible?
Compatible accessories/options include STAND-S-233, extension cables, NAN-915 carrying case, compatible Gentec-EO displays and PC interfaces, and optional INTEGRA or BLU output versions where available. -
What should I know before buying?
Before buying the UP19K-30H-VR-D0, verify heatsink placement, wavelength range, pulse energy, repetition rate, beam size, and average power density.
