RU

PE5B-Ge-D0

P/N 202020

Photodiode detector for laser energy measurement up to 2.4 nJ.

    • 3 mm Ø
    • 5 mm Ø
    • 10 mm Ø
    • Germanium
    • InGaAs
    • UV-Silicon
    • Нет
    • Standard (DB15)
    • INTEGRA (USB)
    • INTEGRA (RS-232)
    • INTEGRA (USB с внешним триггером)
    • BLU (беспроводной)
PE5B-Ge-D0 PE5B-Ge-D0 PE5B-Ge-D0 PE5B-Ge-D0 PE5B-Ge-D0 PE5B-Ge-D0 PE5B-Ge-D0 PE5B-Ge-D0 PE5B-Ge-D0 PE5B-Ge-D0 PE5B-Ge-D0 PE5B-Ge-D0 PE5B-Ge-D0 PE5B-Ge-D0 PE5B-Ge-D0 PE5B-Ge-D0 PE5B-Ge-D0 PE5B-Ge-D0

Traceable calibration:

Logo nist

Available with

Logo Integra

Ключевые особенности семейства продуктов

Very low noise level

Take measurements with a noise level as low as 8 fJ (model PE3B-Si only) with the M-LINK, MAESTRO and S-LINK monitors.

3 sensors available

  • PE-B-SI family: 3 and 10 mm Ø silicon sensors for 0.21 to 1.08 µm
  • PE5B-GE: 5 mm Ø, germanium sensor for 0.8 to 1.65 µm
  • PE3B-IN: 3 mm Ø, InGaAs sensor for 0.9 to 1.7 µm

Smart interface

Containing all the calibration data

Совместимая подставка

Совместимые экраны & интерфейсы ПК

  • MAESTRO MAESTRO

    Touchscreen display device for power & energy measurement. Single-channel, multiple outputs (USB, Ethernet, analog).

  • U-LINK (USB) U-LINK (USB)

    PC interface for power & energy measurement. Single-channel, USB output.

  • U-LINK (RS-232) U-LINK (RS-232)

    PC interface for power & energy measurement. Single-channel, RS-232 output.

  • INTEGRA INTEGRA

    Embedded PC interface for power & energy measurement. Can only be purchased as a detector output option.

  • S-LINK-1 (Ethernet) S-LINK-1 (Ethernet)

    PC interface for power & energy measurement. Single-channel, USB & Ethernet output.

  • S-LINK-2 (Ethernet) S-LINK-2 (Ethernet)

    PC interface for power & energy measurement. Dual-channel, USB & Ethernet output.

  • M-LINK M-LINK

    PC interface for power & energy measurement. Single-channel, USB output.

  • S-LINK-1 S-LINK-1

    PC interface for power & energy measurement. Single-channel, USB output.

  • S-LINK-2 S-LINK-2

    PC interface for power & energy measurement. Dual-channel, USB output.

  • APM (D) APM (D)

    Analog power module, to interface -B heads with oscilloscopes and lock-in amplifiers.

Included

  • Calibration Calibration

    Calibration certificate

  • PWC PWC

    Personal wavelength correctionTM Certificate

  • COVER

    Protective cover for optical surfaces

Возможности измерения

  • Спектральный диапазон

    800 - 1650 nm

  • Типичное время нарастания

    25 µs

  • Максимальная частота повторения

    1000 Hz

  • Максимальная измеряемая энергия

    2,4 nJ

  • Эквивалентная энергия шума

    1 pJ

  • Максимальная ширина импульса

    10 μs

  • Неопределенность калибровки энергии

    ±5.0 % (800 - 1049 nm)
    ±3.5 % (1050 - 1559 nm)
    ±7.0 % (1560 - 1629 nm)
    ±10 % (1630 - 1650 nm)

Пределы прочности

  • Максимальная средняя плотность мощности

    320 MW/cm²

  • Максимальная плотность энергии

    5 µJ/cm²

  • Максимальная мощность

    7,1 μW

Физические характеристики

  • Диаметр диафрагмы

    5 mm

  • Абсорбер

    Ge

  • Размеры

    38.1Ø x 27.4D mm 

  • Вес

    0,09 kg

  • Расстояние до поверхности датчика

    10,5 mm
Распечатать характеристики

CA$1,929.00*

CONTACT SALES

Measure in the NIR range with a germanium absorber

Germanium photodiode-based energy detector for very low energy measurement that offers a fast response for the NIR wavelengths (800-1650 nm).

Customers enjoy:

  • Wide dynamic range
  • Very low noise
  • Not sensitive to visible light
  • Less sensitive to vibrations than pyroelectric detectors

NIST-TRACEABLE CALIBRATION INCLUDED

Traceable calibration provides the ability to trace the readings of laser output measurements to known international measurement standards determined by the National Institute of Standards and Technology (NIST). This ensures that the measurements taken by the instruments are reliable and accurate.

Benefits include:

  • Make valid comparisons of measurements taken by other instruments inside and outside your organization and over time
  • Comply with regulations or conform to industry standards
  • Avoid costly measurement mistakes in your operations
  • Improve customer confidence in your laser systems
  • Ensure laboratory experiment validity
  • Demonstrate measurement accuracy easily with the calibration certificate we provide
 

Optional INTEGRA (USB or RS-232) output

When you choose the INTEGRA output option you get an all-in-one measurement instrument that combines both the detector and the meter in one convenient product. Plug the detector in your PC, install our free software and start measuring.

Why choose it?

  • The most cost-efficient solution
  • Same measurement performance as our other solutions
  • No compromise on interface functions and features
  • Compact solution for OEM applications and field servicing
  • Save money on recalibration with an all-in-one instrument
 

Связанные видео

All videos

Совместимые продукты, которые могут вам понадобиться

*Does not include shipping fees, import fees or local representation. Request quote for full details and local sales contact.

Your item has been added to your cart!

You might need these specific products to be able to use the placeholder only.

Compatible products

No compatible product

Проверить, работает ли этот продукт с вашим лазером

Тип измерения:

1

Размер луча

2

Тип лазера

3

Профиль луча

COPYRIGHT ©2024 Gentec-eo Spektrum média