RU

QE12HR-H-MB-QED-D0

P/N 203897

Pyroelectric detector for laser energy measurement up to 1.5 J.

    • 3.7 mm Ø
    • 50 mm Ø
    • 95 mm Ø (90 mm Ø)
    • 195 mm Ø (185 mm Ø)
    • 7.8 x 7.8 mm
    • 12 x 12 mm (9 x 9 mm)
    • 25 x 25 mm (22 x 22 mm)
    • 50 x 50 mm (47 x 47 mm)
    • 65 x 65 mm (62 x 62 mm)
    • Convection
    • Heatsink
    • Water
    • MB - Standard
    • MT - High Repetition Rate
    • MB - Standard (tuned for short pulses)
    • MT - High repetition rate (tuned for short pulses)
    • BL - Spectrally flat
    • MB - Standard (tuned for long pulses)
    • Нет
    • QED - ослабитель высокой энергии
    • Standard
    • INTEGRA (USB)
    • INTEGRA (RS-232)
    • INTEGRA (USB с внешним триггером)
    • BLU (беспроводной)
QE12HR-H-MB-QED-D0 QE12HR-H-MB-QED-D0 QE12HR-H-MB-QED-D0 QE12HR-H-MB-QED-D0 QE12HR-H-MB-QED-D0 QE12HR-H-MB-QED-D0 QE12HR-H-MB-QED-D0 QE12HR-H-MB-QED-D0 QE12HR-H-MB-QED-D0 QE12HR-H-MB-QED-D0 QE12HR-H-MB-QED-D0 QE12HR-H-MB-QED-D0 QE12HR-H-MB-QED-D0 QE12HR-H-MB-QED-D0 QE12HR-H-MB-QED-D0 QE12HR-H-MB-QED-D0 QE12HR-H-MB-QED-D0 QE12HR-H-MB-QED-D0

Traceable calibration:

Logo nist

Available with

Logo Integra

Ключевые особенности семейства продуктов

Modular Concept

Increase the power capability of your detector: 2 different cooling modules

Low Noise Level

0.7 µJ for the MB coating

QED Attenuator Available

Measure higher energy levels. Available with optional calibration, all wavelengths between 532 and 1064 nm, or single wavelength. Read more.

High repetition rate options

  • QE12HR-MB: 1 000 Hz
  • QE12HR-MT: 10 000 Hz

Test Target Included

With the MB models

Smart Interface

Containing all the calibration data

Совместимая подставка

Совместимые экраны & интерфейсы ПК

  • MIRO ALTITUDE MIRO ALTITUDE

    Touchscreen display device for power & energy measurement. Single-channel.

  • MAESTRO MAESTRO

    Touchscreen display device for power & energy measurement. Single-channel, multiple outputs (USB, Ethernet, analog).

  • U-LINK (USB) U-LINK (USB)

    PC interface for power & energy measurement. Single-channel, USB output.

  • U-LINK (RS-232) U-LINK (RS-232)

    PC interface for power & energy measurement. Single-channel, RS-232 output.

  • INTEGRA INTEGRA

    Embedded PC interface for power & energy measurement. Can only be purchased as a detector output option.

  • S-LINK-1 (Ethernet) S-LINK-1 (Ethernet)

    PC interface for power & energy measurement. Single-channel, USB & Ethernet output.

  • S-LINK-2 (Ethernet) S-LINK-2 (Ethernet)

    PC interface for power & energy measurement. Dual-channel, USB & Ethernet output.

  • M-LINK M-LINK

    PC interface for power & energy measurement. Single-channel, USB output.

  • S-LINK-1 S-LINK-1

    PC interface for power & energy measurement. Single-channel, USB output.

  • S-LINK-2 S-LINK-2

    PC interface for power & energy measurement. Dual-channel, USB output.

Included

  • Calibration Calibration

    Calibration certificate

  • PWC PWC

    Personal wavelength correctionTM Certificate

  • COVER

    Protective cover for optical surfaces

  • TEST-TARGET

    A target with the same optical absorber as your QE-MB detector.

Руководство пользователя

Руководство пользователя
Распечатать характеристики

Возможности измерения

  • Спектральный диапазон

    0,3 - 2,1 μm

  • Типичное время нарастания

    70 µs

  • Повторяемость

    <0.5%

  • Максимальная частота повторения

    1000 Hz

  • Максимальная измеряемая энергия

    1,5 J

  • Эквивалентная энергия шума

    2,8 μJ

  • Максимальная ширина импульса

    40 μs

  • Неопределенность калибровки энергии

    ±3 %

Пределы прочности

  • Максимальная средняя плотность мощности

    600 W/cm²

  • Максимальная плотность энергии

    8 J/cm²

  • Максимальная мощность

    12,5 W

Физические характеристики

  • Охлаждение

    Конвекция (радиатор)

  • Ширина диафрагмы

    9 mm

  • Высота диафрагмы

    9 mm

  • Абсорбер

    QED

  • Размеры

    39H x 41W x 38D mm

  • Вес

    0,12 kg

CA$1,896.00

CONTACT SALES

The highest damage thresholds on the market with the QED absorber

Detectors with the QED attenuator are designed for lasers with very high energy density. Our proprietary QED attenuator diffuses the measured beam and absorbs it in a larger volume, making it almost indestructible.

Customers enjoy:

  • The highest maximum energy density damage threshold
  • Very low risk of damaging the equipment with your laser
  • Perfect for pulsed beams with high energy density
{data viewer}

NIST-TRACEABLE CALIBRATION INCLUDED

Traceable calibration provides the ability to trace the readings of laser output measurements to known international measurement standards determined by the National Institute of Standards and Technology (NIST). This ensures that the measurements taken by the instruments are reliable and accurate.

Benefits include:

  • Make valid comparisons of measurements taken by other instruments inside and outside your organization and over time
  • Comply with regulations or conform to industry standards
  • Avoid costly measurement mistakes in your operations
  • Improve customer confidence in your laser systems
  • Ensure laboratory experiment validity
  • Demonstrate measurement accuracy easily with the calibration certificate we provide
 

Optional INTEGRA (USB or RS-232) output

When you choose the INTEGRA output option you get an all-in-one measurement instrument that combines both the detector and the meter in one convenient product. Plug the detector in your PC, install our free software and start measuring.

Why choose it?

  • The most cost-efficient solution
  • Same measurement performance as our other solutions
  • No compromise on interface functions and features
  • Compact solution for OEM applications and field servicing
  • Save money on recalibration with an all-in-one instrument
 

Связанные видео

All videos

Часто задаваемые вопросы

  • What is this product used for?

    The QE12HR-H-MB-QED-D0 is used for high-repetition pulsed energy measurements where both heatsink cooling and QED attenuation are required. It is aimed at beams needing higher energy-density tolerance and higher measurable energy than the detector alone.

  • What are its key specifications?

    Key QE12HR-H-MB-QED-D0 specifications include 9 mm x 9 mm effective aperture with QED, heatsink cooling, 0.3–2.1 µm spectral range with attenuator, maximum measurable energy of 3.9 J, noise equivalent energy of 2.8 µJ, maximum repetition frequency of 1,000 Hz, maximum pulse width of 40 µs, ±3% energy calibration uncertainty, and maximum power of 12.5 W.

  • How do I choose this model vs another?

    Choose this model when QE12HR-H-MB-D0 needs additional QED attenuation for higher energy-density beams. Choose the S-QED version if lower heat handling is acceptable, or choose HR-MT if very fast repetition rate is more important than QED attenuation.

  • What accessories/options are compatible?

    Compatible accessories/options include the integrated QED-12 attenuator configuration, STAND-D-233, DB15-BNC adaptor, NAN-915 carrying case, compatible displays and PC interfaces, and optional INTEGRA output versions.

  • What should I know before buying?

    Before buying the QE12HR-H-MB-QED-D0, confirm that your laser wavelength fits the 0.3–2.1 µm attenuator range and that your pulse energy, repetition rate, average power, pulse width, and beam size match the QED configuration.

Совместимые продукты, которые могут вам понадобиться

*Does not include shipping fees, import fees or local representation. Request quote for full details and local sales contact.

Проверить, работает ли этот продукт с вашим лазером

Тип измерения:

1

Размер луча

2

Тип лазера

3

Профиль луча

COPYRIGHT ©2026 Gentec-eo Spektrum média

Your item has been added to your cart!

You might need these specific products to be able to use the placeholder only.

Совместимые продукты, которые могут вам понадобиться

No compatible product