RU

QE25LP-S-MB-QED-D0

P/N 202182

Pyroelectric detector for laser energy measurement up to 10 J.

    • 3.7 mm Ø
    • 50 mm Ø
    • 95 mm Ø (90 mm Ø)
    • 195 mm Ø (185 mm Ø)
    • 7.8 x 7.8 mm
    • 12 x 12 mm (9 x 9 mm)
    • 25 x 25 mm (22 x 22 mm)
    • 50 x 50 mm (47 x 47 mm)
    • 65 x 65 mm (62 x 62 mm)
    • Convection
    • Heatsink
    • Water
    • MB - Standard
    • MT - High Repetition Rate
    • MB - Standard (tuned for short pulses)
    • MT - High repetition rate (tuned for short pulses)
    • BL - Spectrally flat
    • MB - Standard (tuned for long pulses)
    • Нет
    • QED - ослабитель высокой энергии
    • Standard
    • INTEGRA (USB)
    • INTEGRA (RS-232)
    • INTEGRA (USB с внешним триггером)
    • BLU (беспроводной)
QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0

Traceable calibration:

Logo nist

Available with

Logo Integra

Ключевые особенности семейства продуктов

Modular Concept

Increase the power capability of your detector: 2 different cooling modules

Low Noise Level

2 µJ for the MB coating

QED Attenuator Available

Measure higher energy levels. Available with optional calibration, all wavelengths between 532 and 1064 nm, or single wavelength Read more.

High Repetition Rate Options

  • QE25HR-MB: 1 000 Hz
  • QE25HR-MT: 10 000 Hz

Test Target Included

With the MB models

Smart Interface

Containing all the calibration data

Совместимая подставка

Совместимые экраны & интерфейсы ПК

  • MIRO ALTITUDE MIRO ALTITUDE

    Touchscreen display device for power & energy measurement. Single-channel.

  • MAESTRO MAESTRO

    Touchscreen display device for power & energy measurement. Single-channel, multiple outputs (USB, Ethernet, analog).

  • U-LINK (USB) U-LINK (USB)

    PC interface for power & energy measurement. Single-channel, USB output.

  • U-LINK (RS-232) U-LINK (RS-232)

    PC interface for power & energy measurement. Single-channel, RS-232 output.

  • INTEGRA INTEGRA

    Embedded PC interface for power & energy measurement. Can only be purchased as a detector output option.

  • S-LINK-1 (Ethernet) S-LINK-1 (Ethernet)

    PC interface for power & energy measurement. Single-channel, USB & Ethernet output.

  • S-LINK-2 (Ethernet) S-LINK-2 (Ethernet)

    PC interface for power & energy measurement. Dual-channel, USB & Ethernet output.

  • M-LINK M-LINK

    PC interface for power & energy measurement. Single-channel, USB output.

  • S-LINK-1 S-LINK-1

    PC interface for power & energy measurement. Single-channel, USB output.

  • S-LINK-2 S-LINK-2

    PC interface for power & energy measurement. Dual-channel, USB output.

Included

  • Calibration Calibration

    Calibration certificate

  • PWC PWC

    Personal wavelength correctionTM Certificate

  • COVER

    Protective cover for optical surfaces

  • TEST-TARGET

    A target with the same optical absorber as your QE-MB detector.

Руководство пользователя

Руководство пользователя
Распечатать характеристики

Возможности измерения

  • Спектральный диапазон

    0,3 - 2,1 μm

  • Типичное время нарастания

    550 µs

  • Повторяемость

    <0.5%

  • Максимальная частота повторения

    300 Hz

  • Максимальная измеряемая энергия

    10 J

  • Эквивалентная энергия шума

    8 μJ

  • Максимальная ширина импульса

    400 μs

  • Неопределенность калибровки энергии

    ±3 %

Пределы прочности

  • Максимальная средняя плотность мощности

    600 W/cm²

  • Максимальная плотность энергии

    8 J/cm²

  • Максимальная мощность

    15 W

Физические характеристики

  • Охлаждение

    Конвекция

  • Ширина диафрагмы

    22 mm

  • Высота диафрагмы

    22 mm

  • Абсорбер

    QED

  • Размеры

    53H x 55W x 19D mm

  • Вес

    0,12 kg

CA$2,158.00

CONTACT SALES

The highest damage thresholds on the market with the QED absorber

Detectors with the QED attenuator are designed for lasers with very high energy density. Our proprietary QED attenuator diffuses the measured beam and absorbs it in a larger volume, making it almost indestructible.

Customers enjoy:

  • The highest maximum energy density damage threshold
  • Very low risk of damaging the equipment with your laser
  • Perfect for pulsed beams with high energy density
{data viewer}

NIST-TRACEABLE CALIBRATION INCLUDED

Traceable calibration provides the ability to trace the readings of laser output measurements to known international measurement standards determined by the National Institute of Standards and Technology (NIST). This ensures that the measurements taken by the instruments are reliable and accurate.

Benefits include:

  • Make valid comparisons of measurements taken by other instruments inside and outside your organization and over time
  • Comply with regulations or conform to industry standards
  • Avoid costly measurement mistakes in your operations
  • Improve customer confidence in your laser systems
  • Ensure laboratory experiment validity
  • Demonstrate measurement accuracy easily with the calibration certificate we provide
 

Optional INTEGRA (USB or RS-232) output

When you choose the INTEGRA output option you get an all-in-one measurement instrument that combines both the detector and the meter in one convenient product. Plug the detector in your PC, install our free software and start measuring.

Why choose it?

  • The most cost-efficient solution
  • Same measurement performance as our other solutions
  • No compromise on interface functions and features
  • Compact solution for OEM applications and field servicing
  • Save money on recalibration with an all-in-one instrument
 

Связанные видео

All videos

Часто задаваемые вопросы

  • What is this product used for?

    The QE25LP-S-MB-QED-D0 is used to measure higher-energy or higher-energy-density pulses with a QE25 MB detector and QED attenuator. It is intended for pulsed lasers where the attenuator helps protect the detector and expands usable energy capability.

  • What are its key specifications?

    Key QE25LP-S-MB-QED-D0 specifications include 22 mm x 22 mm effective aperture with QED, convection cooling, 0.3–2.1 µm spectral range with attenuator, maximum measurable energy of 23 J, noise equivalent energy of 4 µJ, maximum repetition frequency of 300 Hz, typical rise time of 550 µs, maximum pulse width of 400 µs, ±3% energy calibration uncertainty, and maximum power of 15 W.

  • How do I choose this model vs another?

    Choose this model instead of QE25LP-S-MB-D0 when you need higher measurable energy or higher energy-density tolerance. Choose the H-QED version when the same QED protection is needed with higher power handling.

  • What accessories/options are compatible?

    Compatible accessories/options include the QED-25 attenuator configuration, STAND-D-233, DB15-BNC adaptor, NAN-915 carrying case, compatible displays and PC interfaces, and optional INTEGRA output versions.

  • What should I know before buying?

    Before buying the QE25LP-S-MB-QED-D0, confirm that your wavelength fits the QED range, typically 0.3–2.1 µm, and that your beam fits the 22 mm x 22 mm effective aperture. QED versions require combined calibration and should be selected when higher energy density is expected.

Совместимые продукты, которые могут вам понадобиться

*Does not include shipping fees, import fees or local representation. Request quote for full details and local sales contact.

Проверить, работает ли этот продукт с вашим лазером

Тип измерения:

1

Размер луча

2

Тип лазера

3

Профиль луча

COPYRIGHT ©2026 Gentec-eo Spektrum média

Your item has been added to your cart!

You might need these specific products to be able to use the placeholder only.

Совместимые продукты, которые могут вам понадобиться

No compatible product