RU

QE50SP-H-MT-D0

P/N 200485

Pyroelectric detector for laser energy measurement up to 13 J.

    • 3.7 mm Ø
    • 50 mm Ø
    • 95 mm Ø (90 mm Ø)
    • 195 mm Ø (185 mm Ø)
    • 7.8 x 7.8 mm
    • 12 x 12 mm (9 x 9 mm)
    • 25 x 25 mm (22 x 22 mm)
    • 50 x 50 mm (47 x 47 mm)
    • 65 x 65 mm (62 x 62 mm)
    • Convection
    • Heatsink
    • Water
    • MB - Standard
    • MT - High Repetition Rate
    • BL - Spectrally flat
    • MB - Standard (tuned for long pulses)
    • MB - Standard (tuned for short pulses)
    • MT - High repetition rate (tuned for short pulses)
    • Нет
    • QED - ослабитель высокой энергии
    • Standard
    • INTEGRA (USB)
    • INTEGRA (RS-232)
    • INTEGRA (USB с внешним триггером)
    • BLU (беспроводной)
QE50SP-H-MT-D0 QE50SP-H-MT-D0 QE50SP-H-MT-D0 QE50SP-H-MT-D0 QE50SP-H-MT-D0 QE50SP-H-MT-D0 QE50SP-H-MT-D0 QE50SP-H-MT-D0 QE50SP-H-MT-D0 QE50SP-H-MT-D0 QE50SP-H-MT-D0 QE50SP-H-MT-D0 QE50SP-H-MT-D0 QE50SP-H-MT-D0 QE50SP-H-MT-D0 QE50SP-H-MT-D0 QE50SP-H-MT-D0 QE50SP-H-MT-D0

Traceable calibration:

Logo nist

Available with

Logo Integra

Ключевые особенности семейства продуктов

Modular Concept

Increase the power capability of your detector: 2 different cooling modules

Low Noise Level

10 µJ for the MB coating

QED Attenuator Available

Measure higher energy levels. Available with optional calibration, all wavelengths between 532 and 1064 nm, or single wavelength. Read more.

High Repetition Rate Options

  • QE-MB: 200 Hz (standard)
  • QE-MB: 500 Hz (upon request)
  • QE-MT: 4 000 Hz (standard)

Test Target Included

With the MB models

Smart Interface

Containing all the calibration data

Совместимая подставка

Совместимые экраны & интерфейсы ПК

  • MIRO ALTITUDE MIRO ALTITUDE

    Touchscreen display device for power & energy measurement. Single-channel.

  • MAESTRO MAESTRO

    Touchscreen display device for power & energy measurement. Single-channel, multiple outputs (USB, Ethernet, analog).

  • U-LINK (USB) U-LINK (USB)

    PC interface for power & energy measurement. Single-channel, USB output.

  • U-LINK (RS-232) U-LINK (RS-232)

    PC interface for power & energy measurement. Single-channel, RS-232 output.

  • INTEGRA INTEGRA

    Embedded PC interface for power & energy measurement. Can only be purchased as a detector output option.

  • S-LINK-1 (Ethernet) S-LINK-1 (Ethernet)

    PC interface for power & energy measurement. Single-channel, USB & Ethernet output.

  • S-LINK-2 (Ethernet) S-LINK-2 (Ethernet)

    PC interface for power & energy measurement. Dual-channel, USB & Ethernet output.

  • M-LINK M-LINK

    PC interface for power & energy measurement. Single-channel, USB output.

  • S-LINK-1 S-LINK-1

    PC interface for power & energy measurement. Single-channel, USB output.

  • S-LINK-2 S-LINK-2

    PC interface for power & energy measurement. Dual-channel, USB output.

Included

  • Calibration Calibration

    Calibration certificate

  • PWC PWC

    Personal wavelength correctionTM Certificate

  • COVER

    Protective cover for optical surfaces

Руководство пользователя

Руководство пользователя
Распечатать характеристики

Возможности измерения

  • Спектральный диапазон

    0,193 - 20 μm

  • Типичное время нарастания

    20 µs

  • Повторяемость

    <0.5%

  • Максимальная частота повторения

    4000 Hz

  • Максимальная измеряемая энергия

    13 J

  • Эквивалентная энергия шума

    10 μJ

  • Максимальная ширина импульса

    10 μs

  • Неопределенность калибровки энергии

    ±3 %

Пределы прочности

  • Максимальная средняя плотность мощности

    10 W/cm²

  • Максимальная плотность энергии

    0,5 J/cm²

  • Максимальная мощность

    20 W

Физические характеристики

  • Охлаждение

    Конвекция (радиатор)

  • Ширина диафрагмы

    50 mm

  • Высота диафрагмы

    50 mm

  • Абсорбер

    MT

  • Размеры

    75H x 75W x 44D mm

  • Вес

    0,34 kg

CA$2,200.00

CONTACT SALES

Handle high repetition rates with the MT absorber

Designed for pulsed lasers with high repetition rates, the MT absorber features an improved temporal response to accurately measure pulse-to-pulse energy at high repetition rates up to 10 kHz.

Customers enjoy:

  • Measure all pulses at high repetition rates
  • Low risk of damaging the equipment
  • Suitable for a wide range of laser wavelengths
{data viewer}

NIST-TRACEABLE CALIBRATION INCLUDED

Traceable calibration provides the ability to trace the readings of laser output measurements to known international measurement standards determined by the National Institute of Standards and Technology (NIST). This ensures that the measurements taken by the instruments are reliable and accurate.

Benefits include:

  • Make valid comparisons of measurements taken by other instruments inside and outside your organization and over time
  • Comply with regulations or conform to industry standards
  • Avoid costly measurement mistakes in your operations
  • Improve customer confidence in your laser systems
  • Ensure laboratory experiment validity
  • Demonstrate measurement accuracy easily with the calibration certificate we provide
 

Optional INTEGRA (USB or RS-232) output

When you choose the INTEGRA output option you get an all-in-one measurement instrument that combines both the detector and the meter in one convenient product. Plug the detector in your PC, install our free software and start measuring.

Why choose it?

  • The most cost-efficient solution
  • Same measurement performance as our other solutions
  • No compromise on interface functions and features
  • Compact solution for OEM applications and field servicing
  • Save money on recalibration with an all-in-one instrument
 

Связанные видео

All videos

Часто задаваемые вопросы

  • What is this product used for?

    The QE50SP-H-MT-D0 is used to measure short-pulse laser energy at high repetition rates with MT absorber performance and heatsink cooling. It is suited for applications needing the QE50SP response with higher average-power handling.

  • What are its key specifications?

    Key QE50SP-H-MT-D0 specifications include 50 mm x 50 mm aperture, MT absorber, heatsink cooling, 0.19–20 µm spectral range, calibrated spectral range of 0.248–2.1 µm, maximum measurable energy of 13 J, noise equivalent energy of 10 µJ, maximum repetition frequency of 4,000 Hz, typical rise time of 20 µs, maximum pulse width of 10 µs, ±3% calibration uncertainty, and maximum power of 20 W.

  • How do I choose this model vs another?

    Choose this model instead of QE50SP-S-MT-D0 when the measurement needs the same high-repetition MT absorber with more heat handling. Choose QE50LP models if broadband MB behavior or longer pulse capability is more important than high repetition rate.

  • What accessories/options are compatible?

    Compatible accessories/options include STAND-D-233, DB15-BNC adaptor, QED-50 attenuator availability for QE50 series, NAN-915 carrying case, compatible displays and PC interfaces, and optional INTEGRA output versions.

  • What should I know before buying?

    Before buying the QE50SP-H-MT-D0, confirm pulse width, repetition rate, pulse energy, wavelength, average power, beam size, and damage thresholds. The heatsink helps with power handling but does not remove the need to verify energy density.

Совместимые продукты, которые могут вам понадобиться

*Does not include shipping fees, import fees or local representation. Request quote for full details and local sales contact.

Проверить, работает ли этот продукт с вашим лазером

Тип измерения:

1

Размер луча

2

Тип лазера

3

Профиль луча

COPYRIGHT ©2026 Gentec-eo Spektrum média

Your item has been added to your cart!

You might need these specific products to be able to use the placeholder only.

Совместимые продукты, которые могут вам понадобиться

No compatible product