RU

UP55N-40S-H9-D0

P/N 200215

Thermal detector for laser power measurement up to 40 W.

    • 10 mm Ø
    • 12 mm Ø
    • 16 - 19 mm Ø
    • 25 mm Ø
    • 50 - 55 mm Ø
    • 100 mm Ø
    • Convection (up to 50 W)
    • Heatsink (up to 100 W)
    • Fan (up to 600 W)
    • Water (up to 700 W)
    • Water – large casing (up to 2.5kW)
    • Convection - compact casing
    • Large Heatsink
    • H - Broadband
    • VR - High energy density
    • HD - Broadband, high power
    • QED - High energy density
    • W - Very high power density
    • F - IR filter
    • VP - Ultrashort Pulses
    • Standard
    • INTEGRA (USB)
    • INTEGRA (RS-232)
    • INTEGRA (USB с внешним триггером)
    • BLU (беспроводной)
UP55N-40S-H9-D0 UP55N-40S-H9-D0 UP55N-40S-H9-D0 UP55N-40S-H9-D0 UP55N-40S-H9-D0 UP55N-40S-H9-D0 UP55N-40S-H9-D0 UP55N-40S-H9-D0 UP55N-40S-H9-D0 UP55N-40S-H9-D0 UP55N-40S-H9-D0 UP55N-40S-H9-D0 UP55N-40S-H9-D0 UP55N-40S-H9-D0 UP55N-40S-H9-D0 UP55N-40S-H9-D0 UP55N-40S-H9-D0 UP55N-40S-H9-D0

Traceable calibration:

Logo nist

Available with

Logo blu Logo Integra

Ключевые особенности семейства продуктов

Modular Concept

Increase the power capability of your detector: 4 different cooling modules

High Performance

  • Fast Rise Time (2 sec)
  • High Damage Threshold (45 kW/cm2)

Compact Design

Only 32 mm thick (40S model)

Energy Mode

Measure single shot energy up to 200 J

Smart Interface

Containing all the calibration data

Совместимая подставка

Совместимые экраны & интерфейсы ПК

  • MIRO ALTITUDE MIRO ALTITUDE

    Touchscreen display device for power & energy measurement. Single-channel.

  • MAESTRO MAESTRO

    Touchscreen display device for power & energy measurement. Single-channel, multiple outputs (USB, Ethernet, analog).

  • U-LINK (USB) U-LINK (USB)

    PC interface for power & energy measurement. Single-channel, USB output.

  • U-LINK (RS-232) U-LINK (RS-232)

    PC interface for power & energy measurement. Single-channel, RS-232 output.

  • INTEGRA INTEGRA

    Embedded PC interface for power & energy measurement. Can only be purchased as a detector output option.

  • BLU BLU

    Embedded wireless interface for power measurement. Can only be purchased as a detector output option.

  • TUNER TUNER

    Display device with tuning needle for power measurement. Single-channel.

  • UNO UNO

    Economical display device for power measurement. Single-channel.

  • P-LINK (USB) P-LINK (USB)

    PC interface for power measurement. Single-channel, USB output.

  • P-LINK (RS-232) P-LINK (RS-232)

    PC interface for power measurement. Single-channel, RS-232 output.

  • S-LINK-1 (Ethernet) S-LINK-1 (Ethernet)

    PC interface for power & energy measurement. Single-channel, USB & Ethernet output.

  • S-LINK-2 (Ethernet) S-LINK-2 (Ethernet)

    PC interface for power & energy measurement. Dual-channel, USB & Ethernet output.

  • M-LINK M-LINK

    PC interface for power & energy measurement. Single-channel, USB output.

  • S-LINK-1 S-LINK-1

    PC interface for power & energy measurement. Single-channel, USB output.

  • S-LINK-2 S-LINK-2

    PC interface for power & energy measurement. Dual-channel, USB output.

  • P-LINK-4 (USB) P-LINK-4 (USB)

    PC interface for power measurement. Four channels.

Included

  • Calibration Calibration

    Calibration certificate

  • PWC PWC

    Personal wavelength correctionTM Certificate

  • COVER

    Protective cover for optical surfaces

Руководство пользователя

Руководство пользователя
Распечатать характеристики

Возможности измерения

  • Максимальная средняя мощность (длительная)

    40 W

  • Максимальная средняя мощность (1 минута)

    80 W

  • Эквивалентная мощность шума

    5 mW

  • Спектральный диапазон

    0,193 - 20 μm

  • Типичное время нарастания

    2 s

  • Неопределенность калибровки мощности

    ±2.5 %

  • Повторяемость

    ±0.5 %

Возможности измерения (энергетический режим)

  • Максимальная измеряемая энергия

    200 J

  • Эквивалентная энергия шума

    0,25 J

  • Минимальный период повторения

    11,1 s

  • Максимальная ширина импульса

    433 ms

  • Неопределенность калибровки энергии

    ±5 %

Пределы прочности

  • Максимальная средняя плотность мощности

    45 kW/cm²

  • Максимальная плотность энергии

    1 J/cm²

Физические характеристики

  • Охлаждение

    Конвекция

  • Диаметр диафрагмы

    55 mm

  • Абсорбер

    H9

  • Размеры

    89H x 89W x 35D mm

  • Вес

    0,62 kg

CA$1,794.00

CONTACT SALES

Versatile absorber suitable for most applications

Our H absorber offers a spectral response that is both broadband and spectrally flat, making this power detector a versatile solution that can cover most laser power measurement needs. Our proprietary manufacturing method also gives this absorber good damage thresholds, for both average power density and energy density. It has a high absorption capacity and, therefore, generates a relatively low percentage of back reflection.

Customers enjoy:

  • Useful for measuring a wide range of lasers
  • Low risk of damaging the equipment
  • Allows fast rise time
{data viewer}

Faster measurement with XNR AnticipationTM

Measure laser power up to 10x faster (model-dependant) with XNR AnticipationTM. Our proprietary algorithm looks at the rate at which the signal increases or decreases and combines this with calibration data to predict the result. The measurement is therefore calculated and displayed faster than the natural response of the detector.

Why does it matter?

  • Save several seconds to tens of seconds for each measurement
  • Shorter operation interruption
  • Faster laser output diagnostics
  • Increased productivity
  • No compromise on measurement accuracy

NIST-TRACEABLE CALIBRATION INCLUDED

Traceable calibration provides the ability to trace the readings of laser output measurements to known international measurement standards determined by the National Institute of Standards and Technology (NIST). This ensures that the measurements taken by the instruments are reliable and accurate.

Benefits include:

  • Make valid comparisons of measurements taken by other instruments inside and outside your organization and over time
  • Comply with regulations or conform to industry standards
  • Avoid costly measurement mistakes in your operations
  • Improve customer confidence in your laser systems
  • Ensure laboratory experiment validity
  • Demonstrate measurement accuracy easily with the calibration certificate we provide
 

Optional INTEGRA (USB or RS-232) output

When you choose the INTEGRA output option you get an all-in-one measurement instrument that combines both the detector and the meter in one convenient product. Plug the detector in your PC, install our free software and start measuring.

Why choose it?

  • The most cost-efficient solution
  • Same measurement performance as our other solutions
  • No compromise on interface functions and features
  • Compact solution for OEM applications and field servicing
  • Save money on recalibration with an all-in-one instrument
 
{blu-integra-up}

Optional BLU (wireless) output

This detector can be purchased with an embedded wireless interface. Save money by not having to purchase a separate monitor. Download our free mobile app or PC software, activate your Bluetooth connection and start measuring your laser.

Why go wireless?

  • Create your optimal measurement setup without being limited by cable length or monitor location
  • Receive data at up to 30m from the detector with the same performance
  • Enjoy a safer work environment with less tangled cables
  • Save money on recalibration with an all-in-one instrument
 

Связанные видео

All videos

Часто задаваемые вопросы

  • What is this product used for?

    The UP55N-40S-H9-D0 is used to measure laser power with a 55 mm thermopile detector for general broadband applications up to 40 W continuously. It is a compact convection-cooled choice for labs and production setups that need fast 2-second response and high damage threshold.

  • What are its key specifications?

    Key UP55N-40S-H9-D0 specifications include 40 W continuous power, 80 W for 1 minute, 55 mm aperture, convection cooling, H9 absorber, 0.193–20 µm spectral range, 5 mW noise equivalent power, 2 s typical rise time, ±2.5% power calibration uncertainty, ±0.5% repeatability, and energy mode up to 200 J with 0.25 J noise equivalent energy.

  • How do I choose this model vs another?

    Choose this model when you need the UP55 aperture and H absorber performance at lower average power with the thinnest standalone format. Choose 100H, 300F, or 500W versions if your average power or heat load is higher.

  • What accessories/options are compatible?

    Compatible accessories/options include STAND-S-443, extension cables, fiber adaptor cover for UP55, FOA/FOC fiber adaptors and connectors, NAN-915 carrying case, compatible Gentec-EO displays and PC interfaces, and optional INTEGRA or BLU output versions where available.

  • What should I know before buying?

    Before buying the UP55N-40S-H9-D0, confirm your laser power, wavelength, beam diameter, average power density, pulse energy, and pulse width are within limits. If your application may exceed 40 W continuously, choose a heatsink, fan-cooled, or water-cooled UP55 model.

Совместимые продукты, которые могут вам понадобиться

*Does not include shipping fees, import fees or local representation. Request quote for full details and local sales contact.

Проверить, работает ли этот продукт с вашим лазером

Тип измерения:

1

Размер луча

2

Тип лазера

3

Профиль луча

COPYRIGHT ©2026 Gentec-eo Spektrum média

Your item has been added to your cart!

You might need these specific products to be able to use the placeholder only.

Совместимые продукты, которые могут вам понадобиться

No compatible product