- 19 mm Ø
- 55 mm Ø
- 10 x 10 mm
- H - Standard (up to 500 W)
- H - Standard (up to 3 kW)
- H - Standard (up to 6 kW)
- H - Standard (up to 10 kW)
- H - Standard (up to 250 W)
- Silicon (up to 800 mW)
- W - Very high power density
- Power and Energy
The PRONTO series for high power replaces the FLASH series that is now discontinued. The PRONTO models offer the same laser measurement capabilities, but with new and improved electronics that allow for data logging, more calibration points and USB connection for data transfer and charging the battery.
Wide Power Range
Very low noise level = wide power range with just one device
5 seconds measurements allow for very short cooling time (all models except PRONTO-3K)
Color touch screen display
55 mm aperture to accommodate large beams
- All-metal body
- High damage thresholds
Data logging and data transfer to PC
Maximum average power500 W
Minimum average power1 W
Noise equivalent power0.1 W
Spectral range10.193 - 20 μm
Power calibration uncertainty±3 %
Exposure time5 s
- 1. For the calibrated spectral range, see the user manual.
Continuous power mode
Maximum average power (continuous)40 W
Response time2 s
Maximum average power density125 kW/cm²
Maximum allowable casing temperature65 °C
- 1. At 1064 nm, 100 W CW. May vary with wavelength and average power.
Controller and GUI specifications
Battery typeRechargeable Li-ion
Battery life17 hours or 4,200 measurements (with brightness set at 25%)
Display resolution4 digits
Display size28.0 x 35.0 mm (128 x 160 pixels)
Display typeTouch Screen Color LCD
Internet upgrades viaUSB
Data storage50,000 pts
Battery recharge viaUSB
Aperture diameter55 mm
Dimensions88W x 88L x 32D mm
Mounting holes1 x 8-32, 2 x 1/4-20
Touchscreen laser probes
Universal PC application software.
How calibration works
Understanding the spectral characteristics of your detectors
Power detectors - overview
Understanding your calibration certificate
PRONTO-HIGH-POWER & IPL
Firmware for PRONTO-HIGH-POWER & IPL series.
Data transfer software for PRONTO series.
USB drivers installer
Use this file to install USB drivers for these products: MAESTRO, INTEGRA, U-LINK, P-LINK, M-LINK, S-LINK, BLU, PRONTO, HP, MACH6, BEAMAGE
Your item has been added to your cart!
You might need these specific products to be able to use the placeholder only.
No compatible product