EN

UP100R-50S-H12-D0

Thermal detector for laser power measurement up to 50 W.

UP100R-50S-H12-D0

Traceable calibration:

Logo nist

Available with

Logo Integra

Product family key features

NEW!

High Performance

  • Large aperture
  • High damage threshold (45 kW/cm2)

Energy Mode

Measure single shot energy up to 700 J

Smart Interface

Containing all the calibration data

Compatible stand

Compatible displays & PC interfaces

  • MIRO ALTITUDE MIRO ALTITUDE

    Touchscreen display device for power & energy measurement. Single-channel.

Included

  • Calibration Calibration

    Calibration certificate

  • PWC PWC

    Personal wavelength correctionTM Certificate

Print specifications

Measurement capabilities

  • Maximum average power (continuous)

    50 W

  • Maximum average power (1 minute)

    100 W

  • Noise equivalent power1

    20 mW

  • Spectral range

    0.193 - 20 μm

  • Typical rise time2

    5 s

  • Power calibration uncertainty3

    ±2.5 %

  • Repeatability

    ±0.5 %
    • 1. Nominal value, actual value depends on electrical noise in the measurement system.
    • 2. With anticipation.
    • 3. Including linearity with power.

Measurement capabilities (Energy mode)

  • Typical energy sensitivity

    0.0017 mV/J

  • Maximum measurable energy1

    700 J

  • Noise equivalent energy2

    2 J

  • Minimum repetition period

    30 s

  • Maximum pulse width

    1000 ms

  • Energy calibration uncertainty3

    ±5 %
    • 1. For 360 μs pulses. Higher pulse energy possible for long pulses (ms), less for short pulses (ns).
    • 2. Nominal value, actual value depends on electrical noise in the measurement system.
    • 3. When single-shot energy calibration is purchased

Damage thresholds

  • Maximum average power density

    45 kW/cm²

  • Maximum energy density

    1 J/cm²

Physical characteristics

  • Cooling

    Convection

  • Aperture diameter

    100 mm

  • Absorber

    H12

  • Dimensions

    125H x 125W x 17D mm

  • Weight

    0.62 kg
CONTACT SALES

Versatile absorber suitable for most applications

Our H absorber offers a spectral response that is both broadband and spectrally flat, making this power detector a versatile solution that can cover most laser power measurement needs. Our proprietary manufacturing method also gives this absorber good damage thresholds, for both average power density and energy density. It has a high absorption capacity and, therefore, generates a relatively low percentage of back reflection.

Customers enjoy:

  • Useful for measuring a wide range of lasers
  • Low risk of damaging the equipment
  • Allows fast rise time

Gain insight into your laser’s behavior

Stop wrestling with spreadsheets — let our data viewer turn raw numbers into clear insight right in your browser. Simply import your data log file from PC-Gentec-EO, and instantly visualize your laser measurements with clean graphs, detailed parameters, and useful statistics.

Why use it?

  • Zoom in on any section of your data for focused analysis
  • Access detailed measurement parameters and trends in seconds
  • Get ready-to-use visual insights for reports or troubleshooting
  • Open and compare multiple log files simultaneously
 

Faster measurement with XNR AnticipationTM

Measure laser power up to 10x faster (model-dependant) with XNR AnticipationTM. Our proprietary algorithm looks at the rate at which the signal increases or decreases and combines this with calibration data to predict the result. The measurement is therefore calculated and displayed faster than the natural response of the detector.

Why does it matter?

  • Save several seconds to tens of seconds for each measurement
  • Shorter operation interruption
  • Faster laser output diagnostics
  • Increased productivity
  • No compromise on measurement accuracy

NIST-TRACEABLE CALIBRATION INCLUDED

Traceable calibration provides the ability to trace the readings of laser output measurements to known international measurement standards determined by the National Institute of Standards and Technology (NIST). This ensures that the measurements taken by the instruments are reliable and accurate.

Benefits include:

  • Make valid comparisons of measurements taken by other instruments inside and outside your organization and over time
  • Comply with regulations or conform to industry standards
  • Avoid costly measurement mistakes in your operations
  • Improve customer confidence in your laser systems
  • Ensure laboratory experiment validity
  • Demonstrate measurement accuracy easily with the calibration certificate we provide
 

Optional INTEGRA (USB or RS-232) output

When you choose the INTEGRA output option you get an all-in-one measurement instrument that combines both the detector and the meter in one convenient product. Plug the detector in your PC, install our free software and start measuring.

Why choose it?

  • The most cost-efficient solution
  • Same measurement performance as our other solutions
  • No compromise on interface functions and features
  • Compact solution for OEM applications and field servicing
  • Save money on recalibration with an all-in-one instrument
 

Related videos

All videos

Compatible products you may need

MIRO ALTITUDE

Display: Color touchscreen
Number of channels: 1
Output type: Display, USB (coming soon), Ethernet (coming soon)...

Price: $2641
More info

Your item has been added to your cart!

You might need these specific products to be able to use the placeholder only.

Compatible products you may need

No compatible product

Check if this product works for your laser

Measurement type:

1

Beam size

2

Laser type

3

Beam profile

COPYRIGHT ©2026 Gentec-eo Spektrum média