Reads Both Power and Energy
Thermopiles and pyroelectrics
Available with 1 or 2 Channels
S-LINK-1 and S-LINK-2 models now available
Connects to your PC with included software
Serial commands are available on all versions to let you take full control
Fastest Data Transfer Rate
Get all the points transferred directly into your PC at 10 kHz/Channel
USB or Ethernet
Choose your favourite communications port. The USB version is port-powered
Every model comes standard with a 2.4 V to 24 V external trigger
Controller and GUI specifications
Digital display sizeComputer screen
Data displayReal time, ratio, line plot, histogram, statistics and 3D histogram
External trigger3-24 V @ 13 mA, optically isolated
Serial commands viaUSB
Power meter specifications
Power range1 µW - 10 kW
Device accuracy±0.75 % for 10 % to full scale
StatisticsCurrent value, max, min, average, standard deviation, RMS & PTP stability, time
Response time1 s
Energy meter specifications
Energy range8 fJ to 20 kJ
Digital resolutionNormal Mode: Current scale/4096
Device accuracy±1 % (<500 Hz)±2 % (500 Hz - 1.2 kHz)±3 % (1.2 - 6 kHz)±6 % (6 - 10 kHz)
Repetition rate110 kHz
Real-time data transfer210 kHz/Channel in normal mode, no missing point
StatisticsCurrent value, max, min, average, standard deviation, RMS & PTP stability, pulse #, repetition rate and average power
- 1. Maximum repetition rate may vary with PC and detector speeds.
- 2. Actual rate may depend on the computer
Dimensions106W x 34H x 147D mm
PC software interface for S-LINK series. Don't forget to download and install the USB Drivers.
Firmware for S-LINK series.
LabVIEW VI examples
LabVIEW VI examples for 6.1+
USB drivers installer
Use this file to install USB drivers for these products: MAESTRO, INTEGRA, U-LINK, P-LINK, M-LINK, S-LINK, BLU, PRONTO, HP, MACH6, BEAMAGE
Your item has been added to your cart!
You might need these specific products to be able to use the placeholder only.
No compatible product