EN

HP280A-30KW-HD

High power detector for laser power measurement up to 30000 W.

    • 60 mm Ø (Optimized for 35 mm Ø)
    • 70 mm Ø
    • 100 mm Ø
    • 125 x 125 mm
    • 210 x 210 mm
    • 280 x 280 mm
    • HD - Broadband, high power
    • GD - High power density
    • HE - Broadband, high power
    • Metric
    • Imperial
    • Standard + USB
    • INTEGRA (USB)
    • INTEGRA (RS-232)
    • INTEGRA (USB with external trigger)
    • BLU (wireless)
HP280A-30KW-HD HP280A-30KW-HD HP280A-30KW-HD HP280A-30KW-HD HP280A-30KW-HD HP280A-30KW-HD HP280A-30KW-HD HP280A-30KW-HD HP280A-30KW-HD HP280A-30KW-HD HP280A-30KW-HD HP280A-30KW-HD HP280A-30KW-HD HP280A-30KW-HD HP280A-30KW-HD HP280A-30KW-HD HP280A-30KW-HD HP280A-30KW-HD

Key features

The Highest Power Handling

Custom models handle up to 100 000 W of continuous power. Higher powers are available upon request.

Stable Reading

Less sensitive to variations in water cooling temperature than any other high power watercooled meter on the market.

Infinite Customization Capabilities

  1. Choose your size
  2. Choose your maximum power
  3. We will customize one just for you!

Compact and Light Weight

Lighter and more compact than any other high power detector on the market, thanks to our unique design.

Available with YAG and CO2 Calibration

All HP models can be calibrated at YAG and CO2 wavelengths with a calibration uncertainty of +/- 5%.

Direct USB Connection to a PC

Each head comes with both a DB-15 connector (for use with a Gentec-EO monitor) and a USB2.0 output for direct connection to a PC. Other connectors available upon request.

Compatible stand

Compatible displays & PC interfaces

  • MAESTRO MAESTRO

    Touchscreen display device for power & energy measurement. Single-channel, multiple outputs (USB, Ethernet, Analog).

  • TUNER TUNER

    Display device with tuning needle for power measurement. Single-channel.

  • UNO UNO

    Economical display device for power measurement. Single-channel.

  • S-LINK-1 S-LINK-1

    PC interface for power & energy measurement. Single-channel, USB output.

  • S-LINK-2 S-LINK-2

    PC interface for power & energy measurement. Dual-channel, USB output.

  • P-LINK (USB) P-LINK (USB)

    PC interface for power measurement. Single-channel, USB output.

  • M-LINK M-LINK

    PC interface for power & energy measurement. Single-channel, USB output.

  • P-LINK (RS-232) P-LINK (RS-232)

    PC interface for power measurement. Single-channel, RS-232 output.

  • P-LINK-4 (USB) P-LINK-4 (USB)

    PC interface for power measurement. Four channels.

  • P-LINK-4 (Ethernet) V2 P-LINK-4 (Ethernet) V2

    PC interface for power measurement. Four channels.

  • S-LINK-1 (Ethernet) S-LINK-1 (Ethernet)

    PC interface for power & energy measurement. Single-channel, USB & Ethernet output.

  • S-LINK-2 (Ethernet) S-LINK-2 (Ethernet)

    PC interface for power & energy measurement. Dual-channel, USB & Ethernet output.

Measurement capabilities

  • Maximum average power (continuous)

    30000 W
  • Minimum average power1

    1000 W
  • Noise equivalent power2

    25 W
  • Spectral range

    0.19 - 20 μm
  • Typical rise time

    25 sec
  • Typical power sensitivity

    0.07 mV/W
  • Power calibration uncertainty

    ±5 %
  • Repeatability

    ±2 %
  • Linearity with power

    ±2 %
  • Linearity vs beam diameter

    ±2 %
    • 1. For lower powers, call your Gentec-EO representative.
    • 2. Nominal value. Actual value depends on electrical noise in the measurement system.

Water requirements

  • Required cooling flow1

    0-30 kW: (15 - 18) LPM < ±1 LPM/min f, 0-10 kW: (8 - 12) LPM < ±1 LPM/min
  • Temperature range

    15 – 25 °C
  • Rate of temperature change

    < ±3°C/min
    • 1. Contact Gentec-EO for clean deionized water cooling module option.

Damage thresholds

  • Maximum average power density1

    2.5 kW/cm²
    • 1. At 1064 nm, 1.07-1.08 µm and 10.6 µm.

Controller and GUI specifications

  • Data display

    Real time, scope, needle, averaging, histogram and statistics
  • Analog output1

    0-2 Volts
  • Serial commands via

    USB
  • External power supply2

    Through USB or Gentec-EO displays & PC interfaces
  • Display type

    None
    • 1. 12 V maximum output signal available upon request.
    • 2. A USB power adaptor will be necessary if the HP is used with a DB-15 extension cable.

Physical characteristics

  • Aperture width

    280 mm
  • Aperture height

    280 mm
  • Absorber

    HD
  • Dimensions

    300H x 300W x 92D mm
  • Weight

    20 kg

Related videos

Compatible products you may need

Your item has been added to your cart!

You might need these specific products to be able to use the placeholder only.

Compatible products

No compatible product

Check if this product works for your laser

Measurement type:

1

Beam size

2

Laser type

3

Beam profile

COPYRIGHT ©2019 Gentec-eo Spektrum média