EN

HP500A-120KW-HD-D0

P/N Custom

High power detector for laser power measurement up to 120000 W.

    • QBH
    • 60 mm Ø
    • 100 mm Ø
    • 250 mm Ø
    • 125 x 125 mm
    • 280 x 280 mm
    • 500 x 500 mm
    • HD - Broadband, high power
    • GD - High power density, large cone
    • GD - High power density, small cone
    • HE - Broadband, high power
    • Standard (without TUBE)
    • Low (with TUBE)
    • Metric
    • Imperial
    • Standard (DB15) + USB
    • BLU (DB15 + wireless)
HP500A-120KW-HD-D0 HP500A-120KW-HD-D0 HP500A-120KW-HD-D0 HP500A-120KW-HD-D0 HP500A-120KW-HD-D0 HP500A-120KW-HD-D0 HP500A-120KW-HD-D0 HP500A-120KW-HD-D0 HP500A-120KW-HD-D0 HP500A-120KW-HD-D0 HP500A-120KW-HD-D0 HP500A-120KW-HD-D0 HP500A-120KW-HD-D0 HP500A-120KW-HD-D0 HP500A-120KW-HD-D0 HP500A-120KW-HD-D0 HP500A-120KW-HD-D0 HP500A-120KW-HD-D0

Key features

The Highest Power Handling

Custom models handle up to 120,000 W of continuous power. Higher powers are available upon request.

Stable Reading

Less sensitive to variations in water cooling temperature than any other high power watercooled meter on the market.

Infinite Customization Capabilities

  1. Choose your size
  2. Choose your maximum power
  3. We will customize one just for you!

Compact and Light Weight

Lighter and more compact than any other high power detector on the market, thanks to our unique design.

Available with YAG and CO2 Calibration

All HP models can be calibrated at YAG and CO2 wavelengths with a calibration uncertainty of +/- 5%.

Direct USB Connection to a PC

Each head comes with both a DB-15 connector (for use with a Gentec-EO monitor) and a USB2.0 output for direct connection to a PC. Other connectors available upon request.

Award-winning technology

The HP-BLU series wireless detectors for high-power lasers was recognized among the best by an esteemed and experienced panel of judges from the optics and photonics community at the 2020 Laser Focus World Innovators Awards. 


Compatible displays & PC interfaces

  • MAESTRO MAESTRO

    Touchscreen display device for power & energy measurement. Single-channel, multiple outputs (USB, Ethernet, analog).

  • BLU BLU

    Embedded wireless interface for power measurement. Can only be purchased as a detector output option.

  • TUNER TUNER

    Display device with tuning needle for power measurement. Single-channel.

  • UNO UNO

    Economical display device for power measurement. Single-channel.

Measurement capabilities

  • Maximum average power (continuous)

    120000 W

  • Minimum average power1

    6000 W

  • Noise equivalent power2

    300 W

  • Spectral range

    0.193 - 20 μm

  • Typical rise time

    60 s

  • Power calibration uncertainty

    ±5 %

  • Back reflections

    ~ 15 %
    • 1. For lower powers, call your Gentec-EO representative.
    • 2. Depending on cooling water flow and temperature stability

Water requirements

  • Required cooling flow1

    (36 - 48) LPM < ±1 LPM/min

  • Temperature range

    15 – 25 °C

  • Rate of temperature change

    < ±1°C/min

  • Maximum water pressure

    621 kPa (90 psi)
    • 1. Contact Gentec-EO for clean deionized water cooling module option.

Damage thresholds

  • Maximum average power density1

    3.5 kW/cm²
    • 1. At 1064 nm, 1.07-1.08 µm and 10.6 µm, 10 kW CW. Refer to user manual for damage threshold at other powers. May vary with wavelength and average power.

Controller and GUI specifications

  • Data display

    Real time, scope, needle, averaging, histogram and statistics

  • Analog output1

    0-2 Volts

  • Serial commands via

    USB

  • External power supply2

    Through USB or Gentec-EO displays & PC interfaces

  • Display type

    None
    • 1. 12 V maximum output signal available upon request.
    • 2. A USB power adaptor will be necessary if the HP is used with a DB-15 extension cable.

Physical characteristics

  • Cooling

    Water

  • Aperture width

    500 mm

  • Aperture height

    500 mm

  • Absorber

    HD

  • Dimensions

    525H x 525W x 90D mm
Print specifications
Get a quote
Customize this product Inquire

AWARD-WINNING TECHNOLOGY

The HP-BLU series wireless detectors for high-power lasers was recognized among the best by an esteemed and experienced panel of judges from the optics and photonics community at the 2020 Laser Focus World Innovators Awards. 

High power measurements in enclosures or hard-to-reach areas are no longer a problem with the BLU wireless output. With the BLU option, you can grab your laser measurement data at up to 30 m distance with your PC.

Related videos

Compatible products you may need

GCP

Instrument service plan for Gentec-EO products. Includes 1 recalibration and extends the Gentec-EO warranty for 1 year.

More info Get a quote

Your item has been added to your cart!

You might need these specific products to be able to use the placeholder only.

Compatible products

No compatible product

Check if this product works for your laser

Measurement type:

1

Beam size

2

Laser type

3

Beam profile

COPYRIGHT ©2023 Gentec-eo Spektrum média