- 12 mm Ø
- INTEGRA (USB)
- INTEGRA (RS-232)
- INTEGRA (USB with external trigger)
- BLU (wireless)
With its silicon sensor, the integrating sphere is as fast as a photodiode.
High average power
Measure up to 9 W of continuous power.
Our proprietary coating is designed to be strong. Its damage thresholds are orders of magnitude higher than any other "white" coatings on the market.
The IS12L detectors have a NIST-traceable calibration for there entire spectral range. Temperature compensation completes the calibration to give you the most accurate and stable measurements.
Choice of output
The IS12L detectors are available with two output options:
- INTEGRA with USB output (-INT)
- INTEGRA with RS-232 output (-IDR)
Compatible displays & PC interfaces
Embedded PC interface for power & energy measurement. Can only be purchased as a detector output option.
Maximum average power (continuous)19 W
Noise equivalent power21 μW
Spectral range340 - 1100 nm
Typical rise time0.5 sec
Linearity with power±1 %
Sphere inner diameter50 mm Ø
Maximum incidence angle± 10°
Maximum divergence10° (half-angle)
Power Calibration Uncertainty±5.0 % (405 - 499 nm)
±3.5 % (500 - 1063 nm)
±2.5 % (1064 nm)
- 1. At 1064 nm. See curves for maximum power at other wavelengths.
- 2. At 1064 nm. Nominal value. Actual value depends on environmental electromagnetic interference and wavelength.
Maximum average power density12 kW/cm²
Maximum energy density2400 mJ/cm²
- 1. At 1064 nm, CW.
- 2. At 1064 nm, 7 ns.
Aperture diameter12 mm
Dimensions66H x 78W x 66D mm
Embedded monitor for power and energy detectors
Universal PC application software.
Calibration Uncertainty of Photodetectors
How calibration works
Same laser, different measurements. What's the problem?
Understanding the spectral characteristics of your detectors
Integrating sphere laser power detectors
Software for BLU, HP, INTEGRA, MAESTRO, U-LINK and P-LINK series. Don't forget to download and install the USB Drivers.
INTEGRA (V2 RS232 - Photodiode)
Firmware for Integra V2 RS232 photodiode series only.
INTEGRA (V2 USB - Photodiode)
Firmware for Integra V2 USB photodiode series only.
INTEGRA and PRONTO-SI
USB drivers for INTEGRA and PRONTO-SI series.
USB drivers for MAESTRO, HP series, T-RAD, P-LINK series, S-LINK series and M-LINK series.
LabVIEW VI examples
LabVIEW VI examples for 9.0+
Compatible products you may need
Your item has been added to your cart!
You might need these specific products to be able to use the placeholder only.
No compatible product