IS50A-1KW
2D CAD file (PDF)
- 10197-
- English
IS50A-1KW-RSi-INT-D0
P/N 205483Water-cooled integrating sphere detector for laser power measurement up to 1000 W.
-
- 12 mm Ø
- 50 mm Ø
-
- Water
- Convection
-
- Silicon
-
- Standard
- INTEGRA (USB)
- INTEGRA (RS-232)
- INTEGRA (USB with external trigger)
- BLU (wireless)
Available with
Key features
Fastest response
With their silicon sensors, the IS detectors are as fast as photodiodes.
High average power
Two sizes are available, both with high average power capabilities:
- 12 mm aperture for up to 9 W of continuous power
- 50 mm aperture for up to 1000 W of continuous power
Resistant coating
Our proprietary coating is designed to be strong. Its damage thresholds are orders of magnitude higher than any other "white" coatings on the market.
Precise calibration
The IS detectors have a NIST-traceable calibration for their entire calibrated spectral range. Temperature compensation completes the calibration to give you the most accurate and stable measurements.
Choice of output
The IS detectors are available with two output options:
- INTEGRA with USB output (-INT)
- INTEGRA with RS-232 output (-IDR)
Award-winning technology
The laser power detectors in the IS series were recognized among the best solutions on the market by an esteemed and experienced panel of judges from the optics and photonics community at the 2022 Laser Focus World Innovators Awards.
Compatible stand
Compatible displays & PC interfaces
-
INTEGRA
Embedded PC interface for power & energy measurement. Can only be purchased as a detector output option.
Measurement capabilities
-
Maximum average power (continuous)1
1000 W -
Noise equivalent power2
10 μW -
Spectral range
340 - 1100 nm -
Typical rise time
0.2 s -
Linearity with power
±1 % -
Sphere inner diameter
100 mm Ø -
Maximum incidence angle
± 25° for beam diameter < 12mm, ± 5° for beam diameter > 12mm -
Maximum divergence
10° (half-angle) -
Power calibration uncertainty
±5.0 % (405 - 499 nm)
±3.5 % (500 - 1069 nm)
±2.5 % (1070 nm) -
Calibrated spectral range
405 - 1070 nm -
Back reflections
12 %, concentrated in a cone with 15 degrees half-angle -
- 1. Up to 1500 W for short exposure. See user manual for maximum power without water cooling.
- 2. At 1070 nm. Nominal value. Actual value depends on environmental electromagnetic interference and wavelength.
Damage thresholds
-
Maximum average power density1
5 kW/cm² -
Maximum energy density2
400 mJ/cm² -
- 1. At 1064 - 1070 nm, CW. May vary with wavelength and average power.
- 2. At 1064 - 1070 nm, 7 ns. May vary with wavelength and pulse width.
Physical characteristics
-
Cooling
Water -
Aperture diameter
50 mm -
Dimensions
127H x 140W x 115D mm -
Weight
4 kg
CA$4,499.20*
-
STAND-S-443-C
Stand, 4 x 4in base, 3in cylinder, 3in steel post, 8-32 & ¼-20 with slip-on post collar.
PEL-#
Pelican carrying case. Various sizes available. Contact us to order.
GCP
Instrument service plan for Gentec-EO products. Includes 1 recalibration and extends the Gentec-EO warranty for 1 year.
-
IS
User Manual
Integrating sphere laser power detectors
- 1.4
- English
INTEGRA
User Manual
Embedded monitor for power and energy detectors
- 3.7
- English
PC-Gentec-EO
User Manual
Universal PC application software.
- 9
- English
Calibration Uncertainty of Photodetectors
Technical note
- English
How calibration works
Technical note
- 2022
- English
Same laser, different measurements. What's the problem?
Technical note
- English
Understanding the spectral characteristics of your detectors
Technical note
- English
Measuring laser power with the IS series: a versatile solution with fast response
Technical note
- English
Understanding your calibration certificate
Technical note
- English
-
PC-Gentec-EO
Software
Software for BLU, HP, INTEGRA, MAESTRO, U-LINK and P-LINK series. Don't forget to download and install the USB Drivers.
- 2.01.14
- English
Integra
LabVIEW VI examples
LabVIEW VI examples for 9.0+
- 1.00.04
- English
USB drivers installer
USB drivers
Use this file to install USB drivers for these products: MAESTRO, INTEGRA, U-LINK, P-LINK, M-LINK, S-LINK, BLU, PRONTO, HP, MACH6, BEAMAGE
- 2.00.02
- English
AWARD-WINNING TECHNOLOGY
The laser power detectors in the IS series were recognized among the best solutions on the market by an esteemed and experienced panel of judges from the optics and photonics community at the 2022 Laser Focus World Innovators Awards.
The IS series opens up new measurement possibilities such as following the complete ramp-up of high-power laser sources, or tracking fast changes in kW-level laser power. The integrating sphere’s proprietary coating was designed to handle high laser power density, and its NIST-traceable calibration provides accurate, reliable results.
Related videos
Compatible products you may need
STAND-S-443-C
Stand, 4 x 4in base, 3in cylinder, 3in steel post, 8-32 & ¼-20 with slip-on post collar.
INTEGRA
Display: PC only
Number of channels: 1
Output type: USB or RS-232
Measurement type: Average power, single-sh...
PEL-#
Pelican carrying case. Various sizes available. Contact us to order.
GCP
Instrument service plan for Gentec-EO products. Includes 1 recalibration and extends the Gentec-EO warranty for 1 year.
*Does not include shipping fees, import fees or local representation. Request quote for full details and local sales contact.
Your item has been added to your cart!
You might need these specific products to be able to use the placeholder only.
Compatible products
No compatible product
