UP55N series, UP50N series
2D CAD file (PDF)
- 8473E
- English
UP55N-300F-H12-IDR-D0
P/N 203384Thermal detector for laser power measurement up to 300 W. With INTEGRA (RS-232) module.
-
- 10 mm Ø
- 12 mm Ø
- 16 - 19 mm Ø
- 25 mm Ø
- 50 - 55 mm Ø
-
- Convection (up to 50 W)
- Heatsink (up to 100 W)
- Fan (up to 600 W)
- Water (up to 700 W)
- Water – large casing (up to 2.5kW)
- Convection - compact casing
- Large Heatsink
-
- H - Broadband
- VR - High energy density
- HD - Broadband, high power
- QED - High energy density
- W - Very high power density
- F - IR filter
- VP - Ultrashort Pulses
-
- Standard
- INTEGRA (USB)
- INTEGRA (RS-232)
- INTEGRA (USB with external trigger)
- BLU (wireless)
Traceable calibration:
Available with
Product family key features
Modular Concept
Increase the power capability of your detector: 4 different cooling modules
High Performance
- Fast Rise Time (2 sec)
- High Damage Threshold (45 kW/cm2)
Compact Design
Only 32 mm thick (40S model)
Energy Mode
Measure single shot energy up to 200 J
Smart Interface
Containing all the calibration data
Compatible stand
Included
-
Calibration
Calibration certificate
-
PWC
Personal wavelength correctionTM Certificate
-
COVER
Protective cover for optical surfaces
-
FAN-12V
Power supply, 12 V. For fan-cooled detectors and INTEGRA (RS-232).
Measurement capabilities
-
Maximum average power (continuous)
300 W -
Maximum average power (1 minute)
300 W -
Noise equivalent power1
15 mW -
Spectral range2
0.193 - 20 μm -
Typical rise time3
2 s -
Power calibration uncertainty4
±2.5 % -
Repeatability
±0.5 % -
- 1. Nominal value, actual value depends on electrical noise in the measurement system.
- 2. For the calibrated spectral range, see the user manual.
- 3. With anticipation.
- 4. Including linearity with power.
Measurement capabilities (Energy mode)
-
Maximum measurable energy1
200 J -
Noise equivalent energy2
0.25 J -
Minimum repetition period
12 s -
Maximum pulse width
430 ms -
Energy calibration uncertainty3
±5 % -
- 1. For 360 μs pulses. Higher pulse energy possible for long pulses (ms), less for short pulses (ns).
- 2. Nominal value, actual value depends on electrical noise in the measurement system.
- 3. When single-shot energy calibration is purchased
Damage thresholds
-
Maximum average power density1
45 kW/cm² -
Maximum energy density2
1 J/cm² -
- 1. At 1064 nm, 10 W CW. May vary with wavelength and average power.
- 2. At 1064 nm, 7 ns, 10 Hz. May vary with wavelength and pulse width.
Physical characteristics
-
Cooling
Fan -
Aperture diameter
55 mm -
Absorber
H12 -
Dimensions
92H x 92W x 117D mm -
Weight
1.41 kg
Price:
Usually in stock. If not, ships within 3 weeks.
-
UP55N-300F-H12
3D model (STEP)
- 9671
- English
BLU
2D CAD file (PDF)
- 9770C
- English
UP55N-300F-H12-BLU
3D model (STEP)
- 9732
- English
Power detectors
Absorption curves
Absorption curves for power detectors
- 2025
- English
INTEGRA module
3D model (STEP)
- 9875
- English
INTEGRA module for UP series
2D CAD file (PDF)
- 9559C
- English
-
FOA-COVER50
Fiber optic adaptor cover for UP55 (50 mm threaded). Reduces aperture from 55 to 50 mm for fiber adaptor or fiber cylind...
Price: $163
EXT-#
Extension cable. Various cable lengths are available, up to 40 m.
NAN-915
Hardshell, waterproof carrying case with padded dividers. Internal size 13 L (351 mm x 236 mm x 157 mm).
-
BLU
User Manual
Bluetooth wireless detectors
- 1.6
- English
INTEGRA
User Manual
Embedded monitor for power and energy detectors
- 3.9
- English
PC-Gentec-EO
User Manual
Universal PC application software.
- 10
- English
UP and XLP12
User Manual
Thermopile power detectors
- 6.8
- English
-
How calibration works
Technical note
- 2025
- English
How thermopile power detectors work
Technical note
- English
Linearity with power of Gentec-EO's thermal laser power detectors
Technical note
- 202206A
- English
Measuring high powers with low power detectors
Technical note
- 202188
- English
Measuring laser power with a thermopile detector: The basics!
Technical note
- 202175
- English
Recalibration options when using an extension cable
Technical note
- 202176
- English
Understanding the spectral characteristics of your detectors
Technical note
- 202202
- English
Power detectors - overview
Comparison table
- 2025
- English
Understanding your calibration certificate
Technical note
- 202184B
- English
Calibration: For measurements you can count on
Technical note
- English
-
PC-Gentec-EO
Software
Software for BLU, HP, INTEGRA, MAESTRO, U-LINK and P-LINK series. Don't forget to download and install the USB Drivers.
- 2.01.22
- English
Integra
LabVIEW VI examples
LabVIEW VI examples for 9.0+
- 1.00.04
- English
USB drivers installer
USB drivers
Use this file to install USB drivers for these products: MAESTRO, INTEGRA, U-LINK, P-LINK, M-LINK, S-LINK, BLU, PRONTO, HP
- 2.00.04
- English
Integra
Python examples
Python examples for INTEGRA.
- 1.00.00
- English
Serial command examples in C for HP and INTEGRA
Code example
- 1.00.00
- English
Versatile absorber suitable for most applications
Our H absorber offers a spectral response that is both broadband and spectrally flat, making this power detector a versatile solution that can cover most laser power measurement needs. Our proprietary manufacturing method also gives this absorber good damage thresholds, for both average power density and energy density. It has a high absorption capacity and, therefore, generates a relatively low percentage of back reflection.
Customers enjoy:
- Useful for measuring a wide range of lasers
- Low risk of damaging the equipment
- Allows fast rise time
Gain insight into your laser’s behavior
Stop wrestling with spreadsheets — let our data viewer turn raw numbers into clear insight right in your browser. Simply import your data log file from PC-Gentec-EO, and instantly visualize your laser measurements with clean graphs, detailed parameters, and useful statistics.
Why use it?
- Zoom in on any section of your data for focused analysis
- Access detailed measurement parameters and trends in seconds
- Get ready-to-use visual insights for reports or troubleshooting
- Open and compare multiple log files simultaneously
Faster measurement with XNR AnticipationTM
Measure laser power up to 10x faster (model-dependant) with XNR AnticipationTM. Our proprietary algorithm looks at the rate at which the signal increases or decreases and combines this with calibration data to predict the result. The measurement is therefore calculated and displayed faster than the natural response of the detector.
Why does it matter?
- Save several seconds to tens of seconds for each measurement
- Shorter operation interruption
- Faster laser output diagnostics
- Increased productivity
- No compromise on measurement accuracy
NIST-TRACEABLE CALIBRATION INCLUDED
Traceable calibration provides the ability to trace the readings of laser output measurements to known international measurement standards determined by the National Institute of Standards and Technology (NIST). This ensures that the measurements taken by the instruments are reliable and accurate.
Benefits include:
- Make valid comparisons of measurements taken by other instruments inside and outside your organization and over time
- Comply with regulations or conform to industry standards
- Avoid costly measurement mistakes in your operations
- Improve customer confidence in your laser systems
- Ensure laboratory experiment validity
- Demonstrate measurement accuracy easily with the calibration certificate we provide
Optional INTEGRA (USB or RS-232) output
When you choose the INTEGRA output option you get an all-in-one measurement instrument that combines both the detector and the meter in one convenient product. Plug the detector in your PC, install our free software and start measuring.
Why choose it?
- The most cost-efficient solution
- Same measurement performance as our other solutions
- No compromise on interface functions and features
- Compact solution for OEM applications and field servicing
- Save money on recalibration with an all-in-one instrument
Android compatibility with optional INTEGRA output for the UP series
The UP series is compatible with your Android device when you choose the INTEGRA (USB) output. You only need a USB-A to USB-C converter such as USBA-C and our free BLU mobile app available in the Google Play Store.
Why use this solution?
- Most portable solution
- No need to carry a laptop
Optional BLU (wireless) output
This detector can be purchased with an embedded wireless interface. Save money by not having to purchase a separate monitor. Download our free mobile app or PC software, activate your Bluetooth connection and start measuring your laser.
Why go wireless?
- Create your optimal measurement setup without being limited by cable length or monitor location
- Receive data at up to 30m from the detector with the same performance
- Enjoy a safer work environment with less tangled cables
- Save money on recalibration with an all-in-one instrument
Related videos
Compatible products you may need
FOA-50
Conical fiber optic adaptor (50 mm threaded) for UP50 series. Choose 1 of 3 FOC connectors available.
Price: $312
FOA-COVER50
Fiber optic adaptor cover for UP55 (50 mm threaded). Reduces aperture from 55 to 50 mm for fiber adaptor or fiber cylind...
Price: $163
FOA-CYL50
Fiber optic adaptor: 50 mm cylinder for UP50 series. Choose 1 of 3 FOA connectors available or plug.
Price: $426
EXT-#
Extension cable. Various cable lengths are available, up to 40 m.
NAN-915
Hardshell, waterproof carrying case with padded dividers. Internal size 13 L (351 mm x 236 mm x 157 mm).
Your item has been added to your cart!
You might need these specific products to be able to use the placeholder only.
Compatible products you may need
No compatible product
