EN

HP100A-12KW-HD-MET-D0

P/N 201328M

High power detector for laser power measurement up to 12000 W.

    • 60 mm Ø (Optimized for 35 mm Ø)
    • 70 mm Ø
    • 100 mm Ø
    • 125 x 125 mm
    • 210 x 210 mm
    • 280 x 280 mm
    • HE - Broadband, high power
    • HD - Broadband, high power
    • GD - High power density
    • Imperial
    • Metric
    • Standard + USB
    • INTEGRA (USB)
    • INTEGRA (RS-232)
    • INTEGRA (USB with external trigger)
    • BLU (wireless)
HP100A-12KW-HD-MET-D0 HP100A-12KW-HD-MET-D0 HP100A-12KW-HD-MET-D0 HP100A-12KW-HD-MET-D0 HP100A-12KW-HD-MET-D0 HP100A-12KW-HD-MET-D0 HP100A-12KW-HD-MET-D0 HP100A-12KW-HD-MET-D0 HP100A-12KW-HD-MET-D0 HP100A-12KW-HD-MET-D0 HP100A-12KW-HD-MET-D0 HP100A-12KW-HD-MET-D0 HP100A-12KW-HD-MET-D0 HP100A-12KW-HD-MET-D0 HP100A-12KW-HD-MET-D0 HP100A-12KW-HD-MET-D0 HP100A-12KW-HD-MET-D0 HP100A-12KW-HD-MET-D0

Key features

High Power Handling

Handles up to 12 kW of continuous power with our standard models. Custom models available for higher powers (See SUPER HP).

Stable Reading

Less sensitive to variations in water cooling temperature than any other high power water-cooled meter on the market

Large Aperture

Our standard HP models (4KW, 12KW and 15KW) have a very large effective aperture up to 125 mm Ø to accomodate even the largest laser beams. Larger apertures with various shapes are available upon request (See SUPER HP).

Available with YAG and CO2 Calibration

All HP Models can be calibrated at YAG and CO2 wavelengths with a calibration uncertainty of +/- 5%

Direct USB Connection to a PC

Each head comes with both a DB-15 connector (for use with a Gentec-EO monitor) and a USB2.0 output for direct connection to a PC.

Compatible stand

Compatible displays & PC interfaces

  • MAESTRO MAESTRO

    Touchscreen display device for power & energy measurement. Single-channel, multiple outputs (USB, Ethernet, Analog).

  • TUNER TUNER

    Display device with tuning needle for power measurement. Single-channel.

  • UNO UNO

    Economical display device for power measurement. Single-channel.

  • S-LINK-1 S-LINK-1

    PC interface for power & energy measurement. Single-channel, USB output.

  • S-LINK-2 S-LINK-2

    PC interface for power & energy measurement. Dual-channel, USB output.

  • P-LINK (USB) P-LINK (USB)

    PC interface for power measurement. Single-channel, USB output.

  • M-LINK M-LINK

    PC interface for power & energy measurement. Single-channel, USB output.

  • P-LINK (RS-232) P-LINK (RS-232)

    PC interface for power measurement. Single-channel, RS-232 output.

  • P-LINK-4 (USB) P-LINK-4 (USB)

    PC interface for power measurement. Four channels.

  • P-LINK-4 (Ethernet) V2 P-LINK-4 (Ethernet) V2

    PC interface for power measurement. Four channels.

  • S-LINK-1 (Ethernet) S-LINK-1 (Ethernet)

    PC interface for power & energy measurement. Single-channel, USB & Ethernet output.

  • S-LINK-2 (Ethernet) S-LINK-2 (Ethernet)

    PC interface for power & energy measurement. Dual-channel, USB & Ethernet output.

Measurement capabilities

  • Maximum average power (continuous)

    12000 W
  • Minimum average power1

    300 W
  • Noise equivalent power2

    10 W
  • Spectral range

    0.19 - 20 μm
  • Typical rise time

    9 sec
  • Typical power sensitivity

    0.15 mV/W
  • Power calibration uncertainty

    ±5 %
  • Repeatability

    ±2 %
  • Back reflections

    10-15%
  • Linearity with power

    ±1.5 %
  • Linearity vs beam diameter

    ±1 %
  • Linearity vs beam position3

    ±1.7 %
    • 1. For lower powers, call your Gentec-EO representative.
    • 2. Nominal value. Actual value depends on electrical noise in the measurement system.
    • 3. For a beam size of 20% of the aperture area, moved across 80% of the aperture area.

Water requirements

  • Required cooling flow1

    (6 - 10) LPM < ±1 LPM/min
  • Temperature range

    15 – 25 °C
  • Rate of temperature change

    < ±3°C/min
  • Maximum water pressure

    413 kPa (60 psi)
    • 1. Contact Gentec-EO for clean deionized water cooling module option.

Damage thresholds

  • Maximum average power density1

    3.5 kW/cm²
    • 1. At 1064 nm, 1.07-1.08 µm and 10.6 µm.

Controller and GUI specifications

  • Data display

    Real time, scope, needle, averaging, histogram and statistics
  • Analog output1

    0-2 Volts
  • Serial commands via

    USB
  • External power supply2

    Through USB or Gentec-EO displays & PC interfaces
  • Display type

    None
    • 1. 12 V maximum output signal available upon request.
    • 2. A USB power adaptor will be necessary if the HP is used with a DB-15 extension cable.

Physical characteristics

  • Aperture diameter

    100 mm
  • Absorber

    HD
  • Dimensions

    127H x 127W x 70D mm
  • Weight

    3.3 kg

Related videos

Compatible products you may need

Your item has been added to your cart!

You might need these specific products to be able to use the placeholder only.

Compatible products

No compatible product

Check if this product works for your laser

Measurement type:

1

Beam size

2

Laser type

3

Beam profile

COPYRIGHT ©2019 Gentec-eo Spektrum média