INTEGRA module
3D model (STEP)
- 9875
- English
IS50A-1KW-RMT-D0
P/N CustomHigh-power joulemeter for laser energy measurement up to 1 kW average power.
-
- 50 mm Ø
- 95 mm Ø (90 mm Ø)
- 145 mm Ø (135 mm Ø)
- 195 mm Ø (185 mm Ø)
- 7.8 x 7.8 mm
- 12 x 12 mm (9 x 9 mm)
- 25 x 25 mm (22 x 22 mm)
- 50 x 50 mm (47 x 47 mm)
- 65 x 65 mm (62 x 62 mm)
-
- Water
- Convection
- Heatsink
-
- MT - High Repetition Rate
- BL - Spectrally flat
- MB - Standard
- MB - Standard (tuned for long pulses)
- MB - Standard (tuned for short pulses)
- MT - High repetition rate (tuned for short pulses)
-
- None
- QED - High Energy Attenuator
-
- Standard
- INTEGRA (USB)
- INTEGRA (RS-232)
- INTEGRA (USB with external trigger)
- BLU (wireless)
Traceable calibration:
Available with
Product family key features
CUSTOM-BUILT
Contact us with your requirements for a version tailored to your needs
High average power
The water-cooled joulemeters can handle high average powers.
Resistant coating
Our proprietary coating is designed to be strong. Its damage thresholds are orders of magnitude higher than any other "white" coatings on the market.
Precise calibration
The IS detectors have a NIST-traceable calibration for their entire calibrated spectral range.
CHOICE OF OUTPUT
The IS-RMT detectors are available with four output options:
- Smart DB15 connector containing all the calibration data
- INTEGRA with USB output (-INT)
- INTEGRA with RS-232 output (-IDR)
- INTEGRA with USB output and external trigger (-INE)
Compatible stand
Compatible displays & PC interfaces
-
MAESTRO
Touchscreen display device for power & energy measurement. Single-channel, multiple outputs (USB, Ethernet, analog).
-
U-LINK (USB)
PC interface for power & energy measurement. Single-channel, USB output.
-
U-LINK (RS-232)
PC interface for power & energy measurement. Single-channel, RS-232 output.
-
S-LINK-1 (Ethernet)
PC interface for power & energy measurement. Single-channel, USB & Ethernet output.
-
S-LINK-2 (Ethernet)
PC interface for power & energy measurement. Dual-channel, USB & Ethernet output.
-
S-LINK-1
PC interface for power & energy measurement. Single-channel, USB output.
-
S-LINK-2
PC interface for power & energy measurement. Dual-channel, USB output.
-
APM (D)
Analog power module, to interface -B heads with oscilloscopes and lock-in amplifiers.
Included
-
Calibration
Calibration certificate
-
PWC
Personal wavelength correctionTM Certificate
-
COVER
Protective cover for optical surfaces
Measurement capabilities
-
Spectral range
0.19 - 2.5 μm -
Typical rise time
30 µs -
Repeatability
±0.5 % -
Maximum repetition frequency
1000 Hz -
Maximum measurable energy
1 J -
Noise equivalent energy1
1 mJ -
Maximum pulse width
10 μs -
Energy calibration uncertainty2
±4 % -
Maximum incidence angle
± 25° for beam diameter < 12mm, ± 5° for beam diameter > 12mm -
Maximum divergence
10° (half-angle) -
Back reflections
12 %, concentrated in a cone with 15 degrees half-angle -
Calibrated spectral range
532 nm, 1064 nm and 1070 nm -
- 1. Typical value
- 2. At 532 nm and 1064 nm
Damage thresholds
-
Maximum average power density1
5 kW/cm² -
Maximum energy density2
400 mJ/cm² -
Maximum power
1 kW -
- 1. At 1064 nm, CW
- 2. At 532 nm and 1064 nm, 7 ns
Physical characteristics
-
Cooling
Water -
Aperture diameter
50 mm -
Absorber
Pyroelectric -
Dimensions
127H x 140W x 115D mm -
Weight
4 kg
-
STAND-D-443
Stand with 4 x 4in base, 3in cylinder, delrin post, ¼-20 & 8-32.
PEL-#
Pelican carrying case. Various sizes available. Contact us to order.
-
How calibration works
Technical note
- 2024
- English
How pyroelectric detectors work
Technical note
- English
Measuring laser pulse energy with a pyroelectric detector: The basics!
Technical note
- English
QED Attenuators for QE Series
Technical note
- 2024
- English
Recalibration options when using an extension cable
Technical note
- English
Understanding the spectral characteristics of your detectors
Technical note
- English
Energy detectors - overview
Comparison table
- 2024
- English
Understanding your calibration certificate
Technical note
- English
Calibration: For measurements you can count on
Technical note
- English
-
PC-Gentec-EO
Software
Software for BLU, HP, INTEGRA, MAESTRO, U-LINK and P-LINK series. Don't forget to download and install the USB Drivers.
- 2.01.16
- English
Integra
LabVIEW VI examples
LabVIEW VI examples for 9.0+
- 1.00.04
- English
USB drivers installer
USB drivers
Use this file to install USB drivers for these products: MAESTRO, INTEGRA, U-LINK, P-LINK, M-LINK, S-LINK, BLU, PRONTO, HP, MACH6, BEAMAGE
- 2.00.02
- English
Diffused back-reflections confined in an angular cone
While thermal detectors and water calorimeters diffusely reflect 10% to 15% of the incoming light in a Lambertian manner, integrating spheres of the IS series reflect only 6% to 12% more directionally through their optical aperture. This helps improve safety in the measurement environment by making it easier to deal with back reflections.
NIST-TRACEABLE CALIBRATION INCLUDED
Traceable calibration provides the ability to trace the readings of laser output measurements to known international measurement standards determined by the National Institute of Standards and Technology (NIST). This ensures that the measurements taken by the instruments are reliable and accurate.
Benefits include:
- Make valid comparisons of measurements taken by other instruments inside and outside your organization and over time
- Comply with regulations or conform to industry standards
- Avoid costly measurement mistakes in your operations
- Improve customer confidence in your laser systems
- Ensure laboratory experiment validity
- Demonstrate measurement accuracy easily with the calibration certificate we provide
Optional INTEGRA (USB or RS-232) output
When you choose the INTEGRA output option you get an all-in-one measurement instrument that combines both the detector and the meter in one convenient product. Plug the detector in your PC, install our free software and start measuring.
Why choose it?
- The most cost-efficient solution
- Same measurement performance as our other solutions
- No compromise on interface functions and features
- Compact solution for OEM applications and field servicing
- Save money on recalibration with an all-in-one instrument
Related videos
Compatible products you may need
STAND-D-443
Stand with 4 x 4in base, 3in cylinder, delrin post, ¼-20 & 8-32.
MAESTRO
Display: Color touchscreen
Number of channels: 1
Output type: Display, USB, Ethernet, RS-232 and analog
Meas...
U-LINK (USB)
Display: PC only
Number of channels: 1
Output type: USB & analog
Measurement type: Average power, single-sho...
U-LINK (RS-232)
Display: PC only
Number of channels: 1
Output type: RS-232 & analog
Measurement type: Average power, single-...
S-LINK-1 (Ethernet)
Display: PC only
Number of channels: 1
Output type: USB & Ethernet
Measurement type: Average power, single-s...
S-LINK-2 (Ethernet)
Display: PC only
Number of channels: 2
Output type: USB & Ethernet
Measurement type: Average power, single-s...
S-LINK-1
Display: PC only
Number of channels: 1
Output type: USB only
Measurement type: Average power, single-shot en...
S-LINK-2
Display: PC only
Number of channels: 2
Output type: USB only
Measurement type: Average power, single-shot en...
APM (D)
Display: None
Number of channels: 1
Output type: Analog
Measurement type: Average power, pulse energy
PEL-#
Pelican carrying case. Various sizes available. Contact us to order.
Your item has been added to your cart!
You might need these specific products to be able to use the placeholder only.
Compatible products
No compatible product
