QE25LP-S-MB-QED-D0

P/N 202182

Pyroelectric detector for laser energy measurement up to 23 J.

    • 7.8 x 7.8 mm
    • 12 x 12 mm (9 x 9 mm)
    • 25 x 25 mm (22 x 22 mm)
    • 50 x 50 mm (47 x 47 mm)
    • 65 x 65 mm (62 x 62 mm)
    • 95 mm Ø (90 mm Ø)
    • Convection
    • Heatsink
    • MB - Standard
    • QED - High Energy Attenuator
    • MT - High Repetition Rate
    • MB - Standard (tuned for short pulses)
    • QED - High energy attenuator (tuned for short pulses)
    • BL - Spectrally flat
    • MB - Standard (Tuned for Long Pulses)
    • Standard
    • INTEGRA (USB)
    • INTEGRA (RS-232)
    • INTEGRA (USB with external trigger)
    • BLU (wireless)
QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0 QE25LP-S-MB-QED-D0

Key features

Modular Concept

Increase the power capability of your detector: 2 different cooling modules

Low Noise Level

2 µJ for the MB coating

QED Attenuator Available

Measure up to 5X higher energies. Available with optional calibration, all wavelengths between 532 & 1064 nm, or single wavelength. Read more.

High Repetition Rate Options

  • QE-MB: 300 Hz (standard)
  • QE-MB: 1 000 Hz (upon request)
  • QE-MT: 6 000 Hz (standard)

Test Target Included

With the MB models

Smart Interface

Containing all the calibration data

Compatible stand

Compatible displays & PC interfaces

  • MAESTRO MAESTRO

    Touchscreen display device for power & energy measurement. Single-channel, multiple outputs (USB, Ethernet, Analog).

  • S-LINK-1 S-LINK-1

    PC interface for power & energy measurement. Single-channel, USB output.

  • S-LINK-2 S-LINK-2

    PC interface for power & energy measurement. Dual-channel, USB output.

  • M-LINK M-LINK

    PC interface for power & energy measurement. Single-channel, USB output.

  • S-LINK-1 (Ethernet) S-LINK-1 (Ethernet)

    PC interface for power & energy measurement. Single-channel, USB & Ethernet output.

  • S-LINK-2 (Ethernet) S-LINK-2 (Ethernet)

    PC interface for power & energy measurement. Dual-channel, USB & Ethernet output.

Measurement capabilities

  • Spectral range1

    0.3 - 2.1 μm
  • Typical rise time

    550 µs
  • Repeatability

    <0.5%
  • Maximum repetition frequency

    300 Hz
  • Maximum divergence

  • Typical energy sensitivity

    10 V/J
  • Maximum measurable energy2

    23 J
  • Noise equivalent energy3

    8 μJ
  • Maximum pulse width

    400 μs
  • Energy calibration uncertainty

    ±3 %
    • 1. For the calibrated spectral range, see the user manual.
    • 2. At 1064 nm, 7 ns, 10 Hz. Increasing pulse width increases maximum measurable energy.
    • 3. Nominal value. Actual value depends on electrical noise in the measurement system.

Damage thresholds

  • Maximum average power density1

    600 W/cm²
  • Maximum energy density2

    8 J/cm²
  • Maximum power

    15 W
    • 1. At 1064 nm, 7 ns, 10 Hz.
    • 2. At 1064 nm, 7 ns, 10 Hz.

Physical characteristics

  • Aperture width

    22 mm
  • Aperture height

    22 mm
  • Absorber

    QED
  • Dimensions

    50H x 50W x 52.5D mm
  • Weight

    0.12 kg

Related videos

Compatible products you may need

Your item has been added to your cart!

You might need these specific products to be able to use the placeholder only.

Compatible products

No compatible product

Check if this product works for your laser

Measurement type:

1

Beam size

2

Laser type

3

Beam profile

COPYRIGHT ©2019 Gentec-eo Spektrum média