EN

QE95LP-S-MB-QED-D0

P/N 202194

Pyroelectric detector for laser energy measurement up to 250 J.

    • 7.8 x 7.8 mm
    • 12 x 12 mm (9 x 9 mm)
    • 25 x 25 mm (22 x 22 mm)
    • 50 x 50 mm (47 x 47 mm)
    • 65 x 65 mm (62 x 62 mm)
    • 95 mm Ø (90 mm Ø)
    • Convection
    • Heatsink
    • MB - Standard
    • QED - High Energy Attenuator
    • MB - Standard (Tuned for Long Pulses)
    • BL - Spectrally flat
    • MB - Standard (tuned for short pulses)
    • MT - High Repetition Rate
    • QED - High energy attenuator (tuned for short pulses)
    • Standard
    • INTEGRA (USB)
    • INTEGRA (RS-232)
    • INTEGRA (USB with external trigger)
    • BLU (wireless)
QE95LP-S-MB-QED-D0 QE95LP-S-MB-QED-D0 QE95LP-S-MB-QED-D0 QE95LP-S-MB-QED-D0 QE95LP-S-MB-QED-D0 QE95LP-S-MB-QED-D0 QE95LP-S-MB-QED-D0 QE95LP-S-MB-QED-D0 QE95LP-S-MB-QED-D0 QE95LP-S-MB-QED-D0 QE95LP-S-MB-QED-D0 QE95LP-S-MB-QED-D0 QE95LP-S-MB-QED-D0 QE95LP-S-MB-QED-D0 QE95LP-S-MB-QED-D0 QE95LP-S-MB-QED-D0 QE95LP-S-MB-QED-D0 QE95LP-S-MB-QED-D0

Key features

Modular Concept

Increase the power capability of your detector: 2 different cooling modules

Extra large Aperture

Effective aperture of 95 mm Ø

QED Attenuator Available

Measure up to 5X higher energies. Available with optional calibration, all wavelengths between 532 & 1064 nm, or single wavelength. Read more.

Low Noise Level

15 µJ for the MB coating

Test Target Included

With the MB models

Smart Interface

Containing all the calibration data

Compatible stand

Compatible displays & PC interfaces

  • MAESTRO MAESTRO

    Touchscreen display device for power & energy measurement. Single-channel, multiple outputs (USB, Ethernet, Analog).

  • S-LINK-1 S-LINK-1

    PC interface for power & energy measurement. Single-channel, USB output.

  • S-LINK-2 S-LINK-2

    PC interface for power & energy measurement. Dual-channel, USB output.

  • M-LINK M-LINK

    PC interface for power & energy measurement. Single-channel, USB output.

  • S-LINK-1 (Ethernet) S-LINK-1 (Ethernet)

    PC interface for power & energy measurement. Single-channel, USB & Ethernet output.

  • S-LINK-2 (Ethernet) S-LINK-2 (Ethernet)

    PC interface for power & energy measurement. Dual-channel, USB & Ethernet output.

Measurement capabilities

  • Spectral range1

    0.3 - 2.1 μm
  • Typical rise time

    2 ms
  • Repeatability

    <0.5%
  • Maximum repetition frequency

    40 Hz
  • Typical energy sensitivity

    2 V/J
  • Maximum measurable energy2

    250 J
  • Noise equivalent energy3

    30 μJ
  • Maximum pulse width

    1.5 ms
  • Energy calibration uncertainty

    ±3 %
    • 1. For the calibrated spectral range, see the user manual.
    • 2. At 1064 nm, 7 ns, 10 Hz. Increasing pulse width increases maximum measurable energy.
    • 3. Nominal value. Actual value depends on electrical noise in the measurement system.

Damage thresholds

  • Maximum average power density1

    600 W/cm²
  • Maximum energy density2

    8 J/cm²
  • Maximum power

    45 W
    • 1. At 1064 nm, 7 ns, 10 Hz.
    • 2. At 1064 nm, 7 ns, 10 Hz.

Physical characteristics

  • Aperture diameter

    90 mm
  • Absorber

    QED
  • Dimensions

    122H x 122W x 20D mm
  • Weight

    0.78 kg

Related videos

Compatible products you may need

Your item has been added to your cart!

You might need these specific products to be able to use the placeholder only.

Compatible products

No compatible product

Check if this product works for your laser

Measurement type:

1

Beam size

2

Laser type

3

Beam profile

COPYRIGHT ©2019 Gentec-eo Spektrum média