What’s new at Gentec-EO in January 2021
Friday, January 29, 2021
Below are the latest pieces of news from Gentec-EO in January 2021.
New high-speed pulse energy detectors for high repetition rate lasers up to 10 kHz
Gentec-EO has announced the QE12HR and QE25HR pulse energy detectors. Designed for use with Q-switched lasers and pulsed laser diodes, these sensors feature an improved temporal response to accurately measure pulse-to-pulse energy at high repetition rates up to 10 kHz.
New products added to our catalog
Following all the new products we launched in 2020, our product catalog certainly deserves to be updated. You can therefore find our catalog addendum for download here.
Ensure you purchase the most optimal solution for your measurement needs with this checklist. Download it now, it's helpful and free!Buyer's checklist for laser power & energy meters
In this document you will find information and detailed specs about :
- U-LINK PC interface: The U-LINK is our new PC interface that can replace all others! It is as small as the P-LINK, as fast as the S-LINK and as versatile as the M-LINK. This PC interface can read ALL our detectors, for both laser power measurement and energy measurement. It is available with either a USB or an RS-232 output.
- QE12HR and QE25HR series: Our QE series of laser energy detectors now includes models tuned for high repetition rates. Measure every pulse at up to 10 kHz pulse-to-pulse.
- HP60A series: With its gold reflector cone and redesigned geometry, the HP60A-15KW-GD can handle the high intensities of very small beams with up to 15 kW of continuous power. The area surrounding the cone is covered with our proprietary high damage threshold absorber.
Download the catalog addendum here
Gentec-EO’s ISO / IEC 17025: 2017 accreditation successfully renewed until 2023
We are pleased to announce the renewal of our ISO / IEC 17025: 2017 accreditation by ANAB (ANSI National Accreditation Board) until April 2, 2023.
User manuals update
- User manual for BA series - Optical attenuators - was updated to version 2.0
- User manual for HP series was updated to version 3.6. It includes updated serial commands for the latest generation of HP models and adjusted water cooling requirements for HP280A-30KW-HD.
All user manuals and software can be found in our download center.
Upcoming events
T&E Support to Prototyping and Experimentation
- Virtual event
- February 1-4
- Website
Photonics+
- February 17-18
- Virtual event
- Website
Arizona Photonics Days
- March 3-5
- Virtual event
- Website
SPIE Photonics West 2021
- March 6-11
- Virtual event
- Website
Laser World of Photonics China
- March 17-19
- Shanghai, China
- Booth W4.4300
- Website
Our full event schedule can be found here.
Recent articles on our blog
Below are the latest articles we published. If you didn’t read them yet, don’t wait any longer:
