UP55C-2.5KW-HD-D0

P/N 202174

Thermal detector for laser power measurement up to 2500 W.

Aperture

There is no product match with this configuration.
Please change the value for cooling and/or absorber.
- 10 mm Ø
- 12 mm Ø
- 16 - 19 mm Ø
- 25 mm Ø
- 50 - 55 mm Ø
Cooling
- Convection (up to 50 W)
- Heatsink (up to 100 W)
- Fan (up to 600 W)
- Water (up to 700 W)
- Water – large casing (up to 2.5kW)
- Convection - compact casing
- Large Heatsink
Absorber
- H - Broadband
- W - Very high power density
- HD - Broadband, high power
- QED - High energy density
- F - IR filter
- VP - Ultrashort Pulses
Output
- Standard
- INTEGRA (USB)
- INTEGRA (RS-232)
- INTEGRA (USB with external trigger)
- BLU (wireless)

Available with

Key features

High Density Absorber

The HD absorber is the strongest on the market for use at high powers, presenting both high average power handling and high power density capabilities.

Performance and Speed at a Low Price

Measures both very low and very high powers (up to 2 500 W) with a fast response time. A compact and versatile detector that is more affordable than any other high power solution on the market.

Smart Interface

Containing all the calibration data

Compatible stand

STAND-S-443-C

Compatible displays & PC interfaces

MIRO ALTITUDE

Touchscreen display device for power & energy measurement. Single-channel.
MAESTRO

Touchscreen display device for power & energy measurement. Single-channel, multiple outputs (USB, Ethernet, analog).
U-LINK (USB)

PC interface for power & energy measurement. Single-channel, USB output.
U-LINK (RS-232)

PC interface for power & energy measurement. Single-channel, USB & RS-232 output.
INTEGRA

Embedded PC interface for power & energy measurement. Can only be purchased as a detector output option.
BLU

Embedded wireless interface for power measurement. Can only be purchased as a detector output option.
TUNER

Display device with tuning needle for power measurement. Single-channel.
UNO

Economical display device for power measurement. Single-channel.
P-LINK (USB)

PC interface for power measurement. Single-channel, USB output.
P-LINK (RS-232)

PC interface for power measurement. Single-channel, RS-232 output.
S-LINK-1 (Ethernet)

PC interface for power & energy measurement. Single-channel, USB & Ethernet output.
S-LINK-2 (Ethernet)

PC interface for power & energy measurement. Dual-channel, USB & Ethernet output.
M-LINK

PC interface for power & energy measurement. Single-channel, USB output.
S-LINK-1

PC interface for power & energy measurement. Single-channel, USB output.
S-LINK-2

PC interface for power & energy measurement. Dual-channel, USB output.
P-LINK-4 (USB)

PC interface for power measurement. Four channels.

Measurement capabilities

Maximum average power (continuous)¹
2500 W
Maximum average power (1 minute)²
2500 W
Noise equivalent power³
200 mW
Spectral range⁴
0.193 - 20 μm
Typical rise time⁵
3.5 s
Typical power sensitivity⁶
8 V/W
Power calibration uncertainty⁷
±2.5 %
Repeatability
±0.5 %
- 1. Minimum cooling flow 3 liters/min, water temperature ≤ 22°C, 1/8 NPT compression fittings for 1/4 inch semi-rigid tube. Contact Gentec-EO for clean deionized water cooling module option.
- 2. Minimum cooling flow 0.5 liters/min, water temperature ≤ 22°C, 1/8 NPT compression fittings for 1/4 inch semi-rigid tube. Contact Gentec-EO for clean deionized water cooling module option.
- 3. Nominal value, actual value depends on electrical noise in the measurement system.
- 4. For the calibrated spectral range, see the user manual.
- 5. With anticipation.
- 6. Into 100 kΩ load. Maximum output voltage = sensitivity x maximum power.
- 7. Including linearity with power.

Damage thresholds

Maximum average power density¹
45 kW/cm²
Maximum energy density²
1 J/cm²
- 1. At 1064 nm, 10 W CW. May vary with wavelength and average power.
- 2. At 1064 nm, 7 ns, 10 Hz. May vary with wavelength and pulse width.