UP55G-600F-HD-D0

P/N 201878B

Thermal detector for laser power measurement up to 600 W.

    • 10 mm Ø
    • 12 mm Ø
    • 16 - 19 mm Ø
    • 25 mm Ø
    • 50 - 55 mm Ø
    • Convection (up to 50 W)
    • Heatsink (up to 100 W)
    • Fan (up to 600 W)
    • Water (up to 700 W)
    • Water – large casing (up to 2.5kW)
    • Convection - compact casing
    • Large Heatsink
    • H - Broadband
    • W - Very high power density
    • VR - High energy density
    • HD - Broadband, high power
    • QED - High energy density
    • F - IR filter
    • F - IR Filter
    • VP - Ultrashort Pulses
    • Standard
    • INTEGRA (USB)
    • INTEGRA (RS-232)
    • INTEGRA (USB with external trigger)
    • BLU (wireless)
UP55G-600F-HD-D0 UP55G-600F-HD-D0 UP55G-600F-HD-D0 UP55G-600F-HD-D0 UP55G-600F-HD-D0 UP55G-600F-HD-D0 UP55G-600F-HD-D0 UP55G-600F-HD-D0 UP55G-600F-HD-D0 UP55G-600F-HD-D0 UP55G-600F-HD-D0 UP55G-600F-HD-D0 UP55G-600F-HD-D0 UP55G-600F-HD-D0 UP55G-600F-HD-D0 UP55G-600F-HD-D0 UP55G-600F-HD-D0 UP55G-600F-HD-D0

Key features

High Density Absorber

The HD absorber is the strongest on the market for use at high powers, presenting both high average power handling and high power density capabilities

No need for Water-Cooling

Unique on the market, measure 600 W of continuous power without the need for water-cooling. Just plug the fan and you are ready to go!

Smart Interface

Containing all the calibration data

Compatible stand

Compatible displays & PC interfaces

  • MAESTRO MAESTRO

    Touchscreen display device for power & energy measurement. Single-channel, multiple outputs (USB, Ethernet, Analog).

  • TUNER TUNER

    Display device with tuning needle for power measurement. Single-channel.

  • UNO UNO

    Economical display device for power measurement. Single-channel.

  • S-LINK-1 S-LINK-1

    PC interface for power & energy measurement. Single-channel, USB output.

  • S-LINK-2 S-LINK-2

    PC interface for power & energy measurement. Dual-channel, USB output.

  • P-LINK (USB) P-LINK (USB)

    PC interface for power measurement. Single-channel, USB output.

  • M-LINK M-LINK

    PC interface for power & energy measurement. Single-channel, USB output.

  • P-LINK (RS-232) P-LINK (RS-232)

    PC interface for power measurement. Single-channel, RS-232 output.

  • P-LINK-4 (USB) P-LINK-4 (USB)

    PC interface for power measurement. Four channels.

  • P-LINK-4 (Ethernet) V2 P-LINK-4 (Ethernet) V2

    PC interface for power measurement. Four channels.

  • S-LINK-1 (Ethernet) S-LINK-1 (Ethernet)

    PC interface for power & energy measurement. Single-channel, USB & Ethernet output.

  • S-LINK-2 (Ethernet) S-LINK-2 (Ethernet)

    PC interface for power & energy measurement. Dual-channel, USB & Ethernet output.

Measurement capabilities

  • Maximum average power (continuous)

    600 W
  • Maximum average power (1 minute)

    600 W
  • Noise equivalent power1

    45 mW
  • Spectral range2

    0.19 - 20 μm
  • Typical rise time3

    2.8 sec
  • Typical power sensitivity4

    0.03 mV/W
  • Power calibration uncertainty5

    ±2.5 %
  • Repeatability

    ±0.5 %
  • Maximum divergence

    • 1. Nominal value, actual value depends on electrical noise in the measurement system.
    • 2. For the calibrated spectral range, see the user manual.
    • 3. With anticipation.
    • 4. Into 100 kΩ load. Maximum output voltage = sensitivity x maximum power.
    • 5. Including linearity with power.

Measurement capabilities (Energy mode)

  • Typical energy sensitivity

    0.008 mV/J
  • Maximum measurable energy1

    200 J
  • Noise equivalent energy2

    0.25 J
  • Minimum repetition period

    12 s
  • Maximum pulse width

    430 ms
  • Energy calibration uncertainty3

    ±5 %
    • 1. For 360 μs pulses. Higher pulse energy possible for long pulses (ms), less for short pulses (ns).
    • 2. Nominal value, actual value depends on electrical noise in the measurement system.
    • 3. When single-shot energy calibration is purchased

Damage thresholds

  • Maximum average power density1

    45 kW/cm²
  • Maximum energy density2

    1 J/cm²
  • Peak power density3

    143 MW/cm²
    • 1. At 1064 nm, 10 W CW.
    • 2. At 1064 nm, 7 ns, 10 Hz.
    • 3. At 1064 nm, 7 ns, 10 Hz.

Physical characteristics

  • Aperture diameter

    55 mm
  • Absorber

    HD
  • Dimensions

    120H x 120W x 135D mm
  • Weight

    2.75 kg

Related videos

Compatible products you may need

Your item has been added to your cart!

You might need these specific products to be able to use the placeholder only.

Compatible products

No compatible product

Check if this product works for your laser

Measurement type:

1

Beam size

2

Laser type

3

Beam profile

COPYRIGHT ©2019 Gentec-eo Spektrum média