EN

UP55M-200W-VR-D0

P/N 201291

Thermal detector for laser power measurement up to 200 W.

    • 10 mm Ø
    • 12 mm Ø
    • 17 mm Ø
    • 19 mm Ø
    • 25 mm Ø
    • 55 mm Ø
    • Convection (up to 40 W)
    • Heatsink (up to 100 W)
    • Fan (up to 600 W)
    • Water (up to 700 W)
    • Water – large casing (up to 2.5kW)
    • Convection - compact casing
    • Large Heatsink
    • H - Broadband
    • W - Very high power density
    • VR - High energy density
    • HD - Broadband, high power
    • F - IR filter
    • F - IR Filter
    • VP - Ultrashort Pulses
    • Standard
    • INTEGRA (USB)
    • INTEGRA (RS-232)
    • INTEGRA (USB with external trigger)
    • BLU
UP55M-200W-VR-D0 UP55M-200W-VR-D0 UP55M-200W-VR-D0 UP55M-200W-VR-D0 UP55M-200W-VR-D0 UP55M-200W-VR-D0 UP55M-200W-VR-D0 UP55M-200W-VR-D0 UP55M-200W-VR-D0 UP55M-200W-VR-D0 UP55M-200W-VR-D0 UP55M-200W-VR-D0 UP55M-200W-VR-D0 UP55M-200W-VR-D0 UP55M-200W-VR-D0 UP55M-200W-VR-D0 UP55M-200W-VR-D0 UP55M-200W-VR-D0

Key features

Modular Concept

Increase the power capability of your detector: 4 different cooling modules

High Peak Power Volume Absorber

  • Perfect for high density beams
  • Average power density of 700 W/cm2 prevents degradation caused by repetitive pulses

Large Aperture

55 mm aperture to accomodate the largest beams

High Average Power

Up to 200 W of continuous power with the watercooled unit

Energy Mode

Measure single shot energy up to 500 J

Smart Interface

Containing all the calibration data

Compatible stand

Compatible displays & PC interfaces

  • MAESTRO MAESTRO

    Touchscreen display device for power & energy measurement. Single-channel, multiple outputs (USB, Ethernet, Analog).

  • TUNER TUNER

    Display device with tuning needle for power measurement. Single-channel.

  • UNO UNO

    Economical display device for power measurement. Single-channel.

  • S-LINK-1 S-LINK-1

    PC interface for power & energy measurement. Single-channel, USB output.

  • S-LINK-2 S-LINK-2

    PC interface for power & energy measurement. Dual-channel, USB output.

  • P-LINK (USB) P-LINK (USB)

    PC interface for power measurement. Single-channel, USB output.

  • M-LINK M-LINK

    PC interface for power & energy measurement. Single-channel, USB output.

  • P-LINK (RS-232) P-LINK (RS-232)

    PC interface for power measurement. Single-channel, RS-232 output.

  • P-LINK-4 (USB) P-LINK-4 (USB)

    4-channel, PC-based, laser power monitor with USB connection.

  • P-LINK-4 (Ethernet) V2 P-LINK-4 (Ethernet) V2

    PC interface for power measurement. Four channels.

  • S-LINK-1 (Ethernet) S-LINK-1 (Ethernet)

    PC interface for power & energy measurement. Single-channel, USB & Ethernet output.

  • S-LINK-2 (Ethernet) S-LINK-2 (Ethernet)

    PC interface for power & energy measurement. Dual-channel, USB & Ethernet output.

Measurement capabilities

  • Maximum average power (continuous)1

    200 W
  • Maximum average power (1 minute)2

    200 W
  • Noise equivalent power3

    15 mW
  • Spectral range4

    0.3 - 2.5 μm
  • Typical rise time5

    4 sec
  • Typical power sensitivity6

    0.04 mV/W
  • Power calibration uncertainty7

    ±2.5 %
  • Repeatability

    ±0.5 %
    • 1. Minimum cooling flow 0.5 liters/min, water temperature ≤ 22°C, 1/8 NPT compression fittings for 1/4 inch semi-rigid tube. Contact Gentec-EO for clean deionized water cooling module option.
    • 2. Minimum cooling flow 0.5 liters/min, water temperature ≤ 22°C, 1/8 NPT compression fittings for 1/4 inch semi-rigid tube. Contact Gentec-EO for clean deionized water cooling module option.
    • 3. Nominal value, actual value depends on electrical noise in the measurement system.
    • 4. This spectral range refers to the calibration traceability.
    • 5. With anticipation.
    • 6. Into 100 kΩ load. Maximum output voltage = sensitivity x maximum power.
    • 7. Including linearity with power.

Measurement capabilities (Energy mode)

  • Typical energy sensitivity

    0.01 mV/J
  • Maximum measurable energy1

    500 J
  • Noise equivalent energy2

    0.25 J
  • Minimum repetition period

    11.1 s
  • Maximum pulse width

    433 ms
  • Energy calibration uncertainty3

    ±5 %
    • 1. For 360 μs pulses. Higher pulse energy possible for long pulses (ms), less for short pulses (ns).
    • 2. Nominal value, actual value depends on electrical noise in the measurement system.
    • 3. When single-shot energy calibration is purchased

Damage threshold

  • Maximum average power density1

    700 W/cm²
  • Maximum energy density2

    6 J/cm²
  • Peak power density3

    860 MW/cm²
    • 1. At 1064 nm, 10 W CW.
    • 2. At 1064 nm, 7 ns, 10 Hz.
    • 3. At 1064 nm, 7 ns, 10 Hz.

Physical characteristics

  • Aperture diameter

    55 mm
  • Absorber

    VR
  • Dimensions

    119H x 89W x 43D mm
  • Weight

    0.84 kg

Related videos

Compatible products you may need

Your item has been added to your cart!

You might need these specific products to be able to use the placeholder only.

Compatible products

No compatible product

Check if this product works for your laser

Measurement type:

1

Beam size

2

Laser type

3

Beam profile

COPYRIGHT ©2019 Gentec-eo Spektrum média