UPF10P-2S-H5-L-D0

Thermal detector for laser power measurement up to 2 W.

    • 10 mm Ø
    • 12 mm Ø
    • 16 - 19 mm Ø
    • 25 mm Ø
    • 50 - 55 mm Ø
    • Convection (up to 2 W)
    • Convection - compact casing (up to 2 W)
    • Fan
    • Heatsink
    • Large Heatsink
    • Water – large casing
    • Water
    • H - Broadband
    • F - IR filter
    • F - IR Filter
    • HD - Broadband, high power
    • QED - High energy density
    • VP - Ultrashort Pulses
    • VR - High energy density
    • W - Very high power density
    • Standard
    • INTEGRA (USB)
    • INTEGRA (RS-232)
    • INTEGRA (USB with external trigger)
    • BLU (wireless)
UPF10P-2S-H5-L-D0 UPF10P-2S-H5-L-D0 UPF10P-2S-H5-L-D0 UPF10P-2S-H5-L-D0 UPF10P-2S-H5-L-D0 UPF10P-2S-H5-L-D0 UPF10P-2S-H5-L-D0 UPF10P-2S-H5-L-D0 UPF10P-2S-H5-L-D0 UPF10P-2S-H5-L-D0 UPF10P-2S-H5-L-D0 UPF10P-2S-H5-L-D0 UPF10P-2S-H5-L-D0 UPF10P-2S-H5-L-D0 UPF10P-2S-H5-L-D0 UPF10P-2S-H5-L-D0 UPF10P-2S-H5-L-D0 UPF10P-2S-H5-L-D0

Key features

Low Power Thermopile

Noise level of a photo detector with the large bandwidth and high power capacity of a thermal device

IR Filter (UPF10 Models)

Removes unwanted IR interference

High Performance

  • Fast rise time (1.4 sec)
  • High damage threshold (36 kW/cm2)

Compact Design

Only 13 mm thick (UP10P model)

Energy Mode

Measure single shot energy up to 3 J

Smart Interface

Containing all the calibration data

Compatible stand

Compatible displays & PC interfaces

  • MAESTRO MAESTRO

    Touchscreen display device for power & energy measurement. Single-channel, multiple outputs (USB, Ethernet, Analog).

  • TUNER TUNER

    Display device with tuning needle for power measurement. Single-channel.

  • UNO UNO

    Economical display device for power measurement. Single-channel.

  • S-LINK-1 S-LINK-1

    PC interface for power & energy measurement. Single-channel, USB output.

  • S-LINK-2 S-LINK-2

    PC interface for power & energy measurement. Dual-channel, USB output.

  • P-LINK (USB) P-LINK (USB)

    PC interface for power measurement. Single-channel, USB output.

  • M-LINK M-LINK

    PC interface for power & energy measurement. Single-channel, USB output.

  • P-LINK (RS-232) P-LINK (RS-232)

    PC interface for power measurement. Single-channel, RS-232 output.

  • P-LINK-4 (USB) P-LINK-4 (USB)

    PC interface for power measurement. Four channels.

  • P-LINK-4 (Ethernet) V2 P-LINK-4 (Ethernet) V2

    PC interface for power measurement. Four channels.

  • S-LINK-1 (Ethernet) S-LINK-1 (Ethernet)

    PC interface for power & energy measurement. Single-channel, USB & Ethernet output.

  • S-LINK-2 (Ethernet) S-LINK-2 (Ethernet)

    PC interface for power & energy measurement. Dual-channel, USB & Ethernet output.

Measurement capabilities

  • Maximum average power (continuous)

    2 W
  • Noise equivalent power1

    30 μW
  • Spectral range2

    0.28 - 2.1 μm
  • Typical rise time3

    1.4 sec
  • Typical power sensitivity4

    2 mV/W
  • Power calibration uncertainty5

    ±2.5 %
  • Repeatability

    ±0.5 %
  • Maximum divergence

    • 1. Nominal value, actual value depends on electrical noise in the measurement system.
    • 2. For the calibrated spectral range, see the user manual.
    • 3. With anticipation.
    • 4. Into 100 kΩ load. Maximum output voltage = sensitivity x maximum power.
    • 5. Including linearity with power.

Measurement capabilities (Energy mode)

  • Typical energy sensitivity

    2.4 mV/J
  • Maximum measurable energy1

    3 J
  • Noise equivalent energy2

    5 mJ
  • Minimum repetition period

    2 s
  • Maximum pulse width

    63 ms
  • Energy calibration uncertainty3

    ±5 %
    • 1. For 360 μs pulses. Higher pulse energy possible for long pulses (ms), less for short pulses (ns).
    • 2. Nominal value, actual value depends on electrical noise in the measurement system.
    • 3. When single-shot energy calibration is purchased

Damage thresholds

  • Maximum average power density1

    36 kW/cm²
  • Maximum energy density2

    1 J/cm²
  • Peak power density3

    143 MW/cm²
    • 1. At 1064 nm, 10 W CW.
    • 2. At 1064 nm, 7 ns, 10 Hz.
    • 3. At 1064 nm, 7 ns, 10 Hz.

Physical characteristics

  • Aperture diameter

    10 mm
  • Absorber

    H5
  • Dimensions

    46H x 46W x 21.4D mm
  • Weight

    0.14 kg

Related videos

Compatible products you may need

Your item has been added to your cart!

You might need these specific products to be able to use the placeholder only.

Compatible products

No compatible product

Check if this product works for your laser

Measurement type:

1

Beam size

2

Laser type

3

Beam profile

COPYRIGHT ©2019 Gentec-eo Spektrum média